ATMega128-16A Minimum System
23Senna·kcci-pcb-design·atmega128-minimum-system/kicad/ATMega128.kicad_pcb
About the ATMega128-16A Minimum System PCB
ATMega128-16A Minimum System is an open source AVR/Arduino PCB design by 23Senna, published on GitHub. It is a 2-layer board measuring 71.5 × 46.3 mm, with 28 components from 16 distinct parts.
Its main chip is the ATmega128-16A, from the AVR/Arduino family. Other key parts include the LT8912B_QFN64. By type, the board carries 10 connectors, 8 capacitors, 3 resistors, 2 ICs, 2 switches and 2 diodes.
From the project
A 2-layer development board for the Microchip ATmega128-16A (TQFP-64): on-board 5 V regulation, a 16 MHz clock, an AVR-ISP programming header, and every I/O port broken out to 2.54 mm headers.
A 2-layer development board for the Microchip ATmega128-16A (TQFP-64): on-board 5 V regulation, a 16 MHz clock, an AVR-ISP programming header, and every I/O port broken out to 2.54 mm headers.
The schematic is split into three sections:
- Power & regulator: L7805 (TO-252) linear regulator with 47 µF input/output bulk capacitors, a slide switch, and an indicator LED. - ATmega128-16A core: 16 MHz HC49 crystal with 22 pF load capacitors, four 0.1 µF decoupling capacitors, and a reset push-button with a 10 kΩ pull-up. - ISP & support: 6-pin AVR-ISP header (PDI = PE0, PDO = PE1, SCK = PB1…

Main components on the ATMega128-16A Minimum System
ATMega128-16A Minimum System bill of materials (BOM)
28 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LT8912B_QFN64 L7805 | TO-252-2 | U2 |
| 1 | ATmega128-16A | TQFP-64_14x14mm_P0.8mm | U3 |
| 1 | ABM8G-25.000MHZ-D2X-T 16MHz | Crystal_SMD_HC49-SD | Y1 |
| 1 | CONN_02X06 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | CONN_02X09 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | DSI-1-1734248-5 AVR-ISP-6 | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 7 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J4, J5, J6, J7, J8, J9, J10 |
| 1 | SW_Nidec_CAS-120A1 | Nidec_Copal_CAS-120A | SW1 |
| 1 | SW_Push | SW_SPST_B3S-1000 | SW2 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 1 | 1N5819HW-7-F LED | LED_0805_2012Metric | D2 |
| 2 | 47uf | CP_Elec_6.3x5.4 | C1, C3 |
| 4 | 0.1uf | C_0805_2012Metric | C2, C4, C5, C8 |
| 2 | 22pF | C_0805_2012Metric | C6, C7 |
| 2 | 330 | R_0805_2012Metric | R1, R3 |
| 1 | 10k | R_0805_2012Metric | R2 |
ATMega128-16A Minimum System design files
The KiCad project lives in the 23Senna/kcci-pcb-design repository on GitHub; these links point at the commit this page was built from.
ATMega128-16A Minimum System: common questions
What microcontroller does the ATMega128-16A Minimum System use?
The ATMega128-16A Minimum System is built around the ATmega128-16A, from the AVR/Arduino family.
How big is the ATMega128-16A Minimum System PCB?
The ATMega128-16A Minimum System measures 71.5 × 46.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ATMega128-16A Minimum System?
28 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ATMega128-16A Minimum System design files?
From the 23Senna/kcci-pcb-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ATMega128-16A Minimum System design in my own project?
The repository has no license, so all rights stay with 23Senna. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ATMega128-16A Minimum System without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in kcci-pcb-design
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k