6 open source boards using the LT8912B(QFN64)
Real designs built with the LT8912B(QFN64), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32-P4-PC Rev B
OLIMEX
60 × 90 mm329 parts4LMIT33MIPI-HDMI
OLIMEX
24 × 60 mm59 parts4LNo license32ESP32
Agon extender
bgates747
60 × 90 mm329 parts4LGPL-3.01ESP32 P4 MIPI DSI to HDMI Converter Board
23Senna
65.3 × 49.1 mm91 parts4LNo license0ESP32
ESP32-P4-PC Rev C
OLIMEX
60 × 90 mm329 parts4LMIT33AVR/Arduino
ATMega128-16A Minimum System
23Senna
71.5 × 46.3 mm28 parts2LNo license0
The LT8912B(QFN64) in open source designs
The gallery holds 6 open source boards using the LT8912B(QFN64) from 4 GitHub repositories; a typical one measures about 60 × 75 mm and carries around 210 components.
83% use four copper layers or more, and 50% carry an open source license.
The most starred is ESP32-P4-PC Rev B by OLIMEX.
Parts used alongside the LT8912B(QFN64)
Microcontrollers on boards using the LT8912B(QFN64)
What boards using the LT8912B(QFN64) are built for
LT8912B(QFN64): common questions
Where can I find a LT8912B(QFN64) reference design?
Each of the 6 boards on this page is a real design using the LT8912B(QFN64). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LT8912B(QFN64)?
The NA(RCLAMP0524P(SLP2510P8)), CH217K(SOT23-6L), ES8311(QFN-20), ESP32-P4NRWxx(QFN104) and FE1.1s(SSOP-28) appear in the most repositories here.
Which microcontrollers do boards using the LT8912B(QFN64) use?
Most are built on ESP32 (3) and AVR/Arduino (1).
How big is a typical board using the LT8912B(QFN64)?
The median is 60 × 75 mm, and 17% are two-layer designs.
What is the most popular open source board using the LT8912B(QFN64)?
By GitHub stars, ESP32-P4-PC Rev B by OLIMEX, with 33 stars.
Can I simulate one of these boards using the LT8912B(QFN64) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.