Conveyor-Shield

23Senna·kcci-pcb-design·conveyor-shield-kel1/kicad/Conveyor-Shield.kicad_pcb

Conveyor-Shield layout, top view — open source board by 23Senna

About the Conveyor-Shield

Conveyor-Shield is an open source PCB design by 23Senna, published on GitHub. It is a 2-layer board measuring 46.5 × 46.9 mm, with 12 components from 12 distinct parts.

Other key parts include the SGM2212-1-8XKC3G. By type, the board carries 9 connectors, 1 IC and 1 switch.

It belongs with the dev boards & breakouts, robotics & motion and displays & leds designs in this gallery.

From the project

A 2-layer shield for the STM32 Nucleo-F411RE that powers and connects all peripherals of the conveyor-belt sorting system built in the firmware module.

A 2-layer shield for the STM32 Nucleo-F411RE that powers and connects all peripherals of the conveyor-belt sorting system built in the firmware module.

The Nucleo and LM2596 footprints are embedded in the board file. The LM2596 3D model path points to a teammate's local library, so it will show as missing in the 3D viewer; the PCB itself is unaffected.

Main components on the Conveyor-Shield

SGM2212-1-8XKC3G

Conveyor-Shield bill of materials (BOM)

12 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SGM2212-1-8XKC3G
NUCLEO-F411RE
U1
1
CONN_02X06
oled
J1
1
CONN_02X09
rotaryencoder
J2
1
DSI-1-1734248-5
SERVO
J3
1
tof40dc
J4
1
relay1
J5
1
Start Button
J6
1
Emergency Button
J7
1
UBTS7960
J8
1
12V Input
J9
1
~
Buck1
1
reset button
SW1

Conveyor-Shield design files

The KiCad project lives in the 23Senna/kcci-pcb-design repository on GitHub; these links point at the commit this page was built from.

Conveyor-Shield: common questions

How big is the Conveyor-Shield?

The Conveyor-Shield measures 46.5 × 46.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Conveyor-Shield?

12 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Conveyor-Shield design files?

From the 23Senna/kcci-pcb-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Conveyor-Shield design in my own project?

The repository has no license, so all rights stay with 23Senna. Use it as a reference, and ask the author before reusing the design.

More boards in kcci-pcb-design

Similar boards