P00B UPDI Programmer
About the P00B UPDI Programmer PCB
P00B UPDI Programmer is an open source PCB design by 42CrMo4, published on GitHub. It is a 2-layer board measuring 61.3 × 35.8 mm, with 26 components from 17 distinct parts.
Other key parts include the TPS61099YFFT, TCK107AF,LF, CH340C and TS3USB30RSWR. By type, the board carries 8 resistors, 4 ICs, 4 diodes, 4 capacitors, 3 connectors and 2 switches.
It belongs with the usb & debug tools designs in this gallery.
From the project
A UPDI Programmer to use the Würth Redfit Skedd Connector and a switch for UPDI and TX of the MCU.
Main components on the P00B UPDI Programmer
P00B UPDI Programmer bill of materials (BOM)
26 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS61099YFFT AP2112K-3.3 Texas Instruments | SOT-23-5 | U1 |
| 1 | TCK107AF,LF | SOT-23-5 | U2 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | TS3USB30RSWR | TS3USB30RSWR_QFN40P140X180X55-10N | U4 |
| 1 | CONN_01X02 GLL1 | GLL1 | J1 |
| 1 | CONN_01X02 TYPE-C-31-M-12 | TYPE-C-31-M-12_HRO_TYPE-C-31-M-12 | J2 |
| 1 | CONN_01X03 Conn_02x02_Counter_Clockwise | PinHeader_2x02_P2.54mm_Vertical | J4 |
| 1 | Jumper_3_Bridged12 | SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm_NumberLabels | JP1 |
| 1 | JS202011JCQN | SW_JS202011JCQN | S1 |
| 1 | EVP-BFAC1A000 Power Cycle | EVP-BFAC1A000_EVPBFAC1A000 | S3 |
| 2 | 5V | LED_0805_2012Metric | D1, D2 |
| 2 | 3.3V | LED_0805_2012Metric | D3, D4 |
| 2 | 1uF | C_0805_2012Metric | C1, C2 |
| 2 | 0.1uF | C_0805_2012Metric | C3, C4 |
| 3 | 5.1k | R_0805_2012Metric | R1, R2, R9 |
| 4 | 330 | R_0805_2012Metric | R3, R4, R5, R7 |
| 1 | 1k | R_0805_2012Metric | R6 |
P00B UPDI Programmer design files
The KiCad project lives in the 42CrMo4/P00B_UPDI_Programmer repository on GitHub; these links point at the commit this page was built from.
- Layoutdesign.kicad_pcb
- Schematicdesign.kicad_sch
- BOMFabrication/BoM/design-bom.csv
P00B UPDI Programmer: common questions
How big is the P00B UPDI Programmer PCB?
The P00B UPDI Programmer measures 61.3 × 35.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the P00B UPDI Programmer?
26 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the P00B UPDI Programmer design files?
From the 42CrMo4/P00B_UPDI_Programmer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the P00B UPDI Programmer design in my own project?
The repository has no license, so all rights stay with 42CrMo4. Use it as a reference, and ask the author before reusing the design.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703
XG Station Power
54.3 × 91 mm9 parts2LCC-BY-4.0703
FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0490
Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389
Adapter tsop48 solder
48 × 33 mm3 parts2LGPL-3.0389
Adapter soic8 solder
48 × 20 mm3 parts2LGPL-3.0389