HardLabs

Mp153-rgb carrier

4ms·mp153-devboard·rgb carrier/mp153-rgb-carrier/mp153-rgb-carrier.kicad_pcb

Mp153-rgb carrier PCB layout, top view — open source STM32 board by 4ms

About the Mp153-rgb carrier PCB

Mp153-rgb carrier is an open source STM32 PCB design by 4ms, published on GitHub. It is a 2-layer board measuring 87.2 × 87.4 mm, with 11 components from 9 distinct parts.

Its main chip is the STM32MP133DAF, from the STM32 family. By type, the board carries 4 capacitors, 2 ICs, 2 connectors, 2 resistors and 1 transistor.

It belongs with the dev boards & breakouts designs in this gallery.

Main components on the Mp153-rgb carrier

STM32MP133DAF

Mp153-rgb carrier bill of materials (BOM)

11 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
~
U1
1
STM32MP133DAF
~
U2
1
MMBT3904-TP
MMBT3904
Micro Commercial Components
Q1
1
ER-TFT3.99-1
Conn_01x40_ER-TFT3.99-1
J1
1
LL1007-1 (2*8 HITEMP)
Eurorack_Power_16pin_Shrouded
Cixi LanLing
J2
2
VES470M1CTR-0505
47uF_5x5.3_16V
Lelon
C1, C4
2
0603YC104KAT2A
100nF_0603_16V
AVX Corporation
C2, C3
1
RC0603FR-071K5L
1.5k_0603
Yageo
R1
1
RC0603FR-0733RL
33Ω_0603
Yageo
R2

Mp153-rgb carrier design files

The KiCad project lives in the 4ms/mp153-devboard repository on GitHub; these links point at the commit this page was built from.

Mp153-rgb carrier: common questions

What microcontroller does the Mp153-rgb carrier use?

The Mp153-rgb carrier is built around the STM32MP133DAF, from the STM32 family.

How big is the Mp153-rgb carrier PCB?

The Mp153-rgb carrier measures 87.2 × 87.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mp153-rgb carrier?

11 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Mp153-rgb carrier design files?

From the 4ms/mp153-devboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Mp153-rgb carrier design in my own project?

The repository has no license, so all rights stay with 4ms. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Mp153-rgb carrier without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in mp153-devboard

Similar boards