Mp153-carrier board
4ms·mp153-devboard·carrier board/v0.3/mp153-carrier-board.kicad_pcb
About the Mp153-carrier board
Mp153-carrier board is an open source PCB design by 4ms, published on GitHub. It is a 2-layer board measuring 87.2 × 87.4 mm, with 98 components from 41 distinct parts.
Other key parts include the TL072HIPWR, FUSB302BMPX, PCM3060PW, AP62301Z6 and AP2411SN-7. By type, the board carries 39 capacitors, 33 resistors, 10 connectors, 8 ICs, 4 diodes and 2 inductors.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the Mp153-carrier board
Mp153-carrier board bill of materials (BOM)
98 components, 41 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | TL072HIPWR TL072H Texas Instruments | TSSOP-8_4.4x3mm_Pitch0.65mm | U1, U8, U11, U12 |
| 1 | FUSB302BMPX On Semi | WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm | U3 |
| 1 | PCM3060PW Texas Instruments | TSSOP-28_4.4x9.7mm_P0.65mm | U9 |
| 1 | AP62301Z6 AP6230xZ6 Diodes Inc | SOT-563 | U13 |
| 1 | AP2411SN-7 AP2411SN Diodes Incorporated | DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U14 |
| 1 | 217179-0001 USB-C_Receptacle_Molex_2171790001 Molex | USB_C_Receptacle_Molex_2171790001 | J1 |
| 1 | 61201021621 Eurorack_Power_10pin_Shrouded Wurth Elektronik | Pins_2x05_2.54mm_TH_EurorackPower_Shrouded | J2 |
| 2 | DF40HC(3.0)-80DS-0.4V(51) Socket_02x40_P0.4mm_W3.0mm_SMT Hirose | Connector-80socket-P0.4mm-W3.0mm | J3, J4 |
| 6 | WQP-WQP518MA 3.5mm_Mono_Switched_sm Wenzhou QingPu Electronics Co | EighthInch_PJ398SM | J5, J9, J10, J11, J12, J13 |
| 1 | R0904N-B100K L-25KQ/LWS 9mm_NoDet_100k_Knurled_Lined Song Huei | Pot_9mm_Knurl_NoDet | POT1 |
| 1 | AP2120N-5.0TRG1 Diodes Incorporated | SOT23-3_PO132 | V1 |
| 2 | BAT54S-7-F BAT54S Diodes Incorporated | SOT23-3_PO132 | D1, D7 |
| 2 | B140HW-7 Diodes Incorporated | D_SOD-123 | D2, D3 |
| 1 | MPZ1608S102ATA00 FerriteBead_0603_0.8A_300mΩ TDK | R_0603 | L1 |
| 1 | SRN5040TA-150M 15uH_1A_5040 Bournes | COIL_5040 | L5 |
| 5 | 0603YC104KAT2A 100nF_0603_16V AVX Corporation | C_0603 | C1, C2, C6, C7, C8 |
| 4 | GCM155R71C104KA55D 100nF_0402_16V Murata | C_0402 | C3, C11, C41, C45 |
| 2 | VES470M1CTR-0505 47uF_5x5.3_16V Lelon | CP_Elec_5x5.3 | C4, C5 |
| 2 | EMK212ABJ106KG-T 10uF_0805_16V_lowESR Taiyo Yuden | C_0805 | C9, C10 |
| 3 | GRM188R60J226MEA0J 22uF_0603_6.3V Murata | C_0603 | C12, C73, C79 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CC0603JRNPO9BN221 220pF_0603_25V Yageo | C_0603 | C42, C48 |
| 1 | GRM21BR61E226ME44L 22uF_0805_25V Murata | C_0805 | C44 |
| 3 | GRM188R6YA225KA12D 2.2uF_0603_25V Murata | C_0603 | C46, C49, C52 |
| 1 | GRM188R61A106KE69D 10uF_0603_10V Murata | C_0603 | C51 |
| 1 | GRM155R60J475ME47 4.7uF_0402_6.3V Murata | C_0402 | C70 |
| 6 | GRM155R71H104KE14D 100nF_0402_50V Murata | C_0402 | C71, C72, C75, C76, C77, C78 |
| 1 | TMK316BBJ226ML-T 22uF_1206_25V Taiyo Yuden | C_1206 | C74 |
| 2 | 06035C103KAT2A 10nF_0603_25V AVX Corporation | C_0603 | C81, C98 |
| 4 | GRM1555C2A181JE01D 180pF_0402_25V Murata | C_0402 | C147, C148, C149, C150 |
| 2 | 0402ZC821KAT2A 820pF_0402_10v AVX Corporation | C_0402 | C152, C153 |
| 2 | RC0603FR-0768RL 68Ω_0603 Yageo | R_0603 | R1, R2 |
| 2 | RC0603FR-0747KL 47k_0603 Yageo | R_0603 | R5, R13 |
| 9 | RC0402FR-0710KL 10k_0402 Yageo | R_0402 | R6, R7, R10, R14, R36, R158, R159, R162 +1 |
| 1 | RC0603FR-07100KL 100k_0603 Yageo | R_0603 | R8 |
| 1 | RC0402FR-0752K3L 52.3k_0402 Yageo | R_0402 | R35 |
| 2 | RC0402FR-0714KL 14k_0402 Yageo | R_0402 | R42, R50 |
| 2 | RC0402FR-07100KL 100k_0402 Yageo | R_0402 | R43, R51 |
| 6 | RC0402FR-071KL 1k_0402 Yageo | R_0402 | R44, R52, R54, R55, R152, R153 |
| 2 | RC0402FR-074K7L 4.7k_0402 Yageo | R_0402 | R47, R48 |
| 2 | RC0402FR-071ML 1M_0402 Yageo | R_0402 | R49, R53 |
| 4 | RC0402FR-0724KL 24k_0402 Yageo | R_0402 | R157, R160, R161, R164 |
Mp153-carrier board design files
The KiCad project lives in the 4ms/mp153-devboard repository on GitHub; these links point at the commit this page was built from.
Mp153-carrier board: common questions
How big is the Mp153-carrier board?
The Mp153-carrier board measures 87.2 × 87.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mp153-carrier board?
98 components, from 41 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mp153-carrier board design files?
From the 4ms/mp153-devboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Mp153-carrier board design in my own project?
The repository has no license, so all rights stay with 4ms. Use it as a reference, and ask the author before reusing the design.
More boards in mp153-devboard
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979