Sdprog
About the Sdprog PCB
Sdprog is an open source PCB design by 4ms, published on GitHub. It is a 2-layer board measuring 23.8 × 14.6 mm, with 4 components from 3 distinct parts.
By type, the board carries 2 connectors and 2 resistors.
It belongs with the dev boards & breakouts designs in this gallery.
Sdprog bill of materials (BOM)
4 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 104031-0811 microSDCon_SMT_104031-0811 Molex | CardSlot_MicroSD_Molex_104031-0811 | CON1 |
| 1 | CLP-105-02-F-D Socket_02x05_P1.27mm_SMT Samtec | Socket_2x05_1.27mm_SMD | J1 |
| 2 | RC0603FR-0710KL 10k_0603 Yageo | R_0603 | R1, R2 |
Sdprog design files
The KiCad project lives in the 4ms/mp153-devboard repository on GitHub; these links point at the commit this page was built from.
Sdprog: common questions
How big is the Sdprog PCB?
The Sdprog measures 23.8 × 14.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sdprog?
4 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sdprog design files?
From the 4ms/mp153-devboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sdprog design in my own project?
The repository has no license, so all rights stay with 4ms. Use it as a reference, and ask the author before reusing the design.
More boards in mp153-devboard
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979