HardLabs

Pcb-RCD-SCM-clocker

4ms·pcb-RCD-SCM-clocker·pcb-v1.2/kicad/clocker-12b.kicad_pcb

Pcb-RCD-SCM-clocker layout, top view — open source AVR/Arduino board by 4ms
Simulate this board

About the Pcb-RCD-SCM-clocker

Pcb-RCD-SCM-clocker is an open source AVR/Arduino PCB design by 4ms, published on GitHub. It is a board measuring 39.6 × 110.9 mm, with 84 components from 34 distinct parts.

Its main chip is the ATMEGA328, from the AVR/Arduino family. Other key parts include the 40106BPWR and TL072. By type, the board carries 26 resistors, 11 connectors, 11 capacitors, 9 LEDs, 5 diodes and 4 ICs.

From the project

PCB for RCD and SCM, kit and pre-built versions

This repository is an archive for the kit and pre-built versions of the RCD and SCM.

While we believe these files are accurate, there may be minor variations and/or corrections made during assembly that aren't recorded in these files.

Copyright (c) 2010, 2011, 2014, 2020 Dan Green (danngreen1@gmail.com)

Please read the above license carefully and contact us if you have any questions regarding acceptable use of these files.

Main components on the Pcb-RCD-SCM-clocker

40106BPWRTL072ATMEGA328

Pcb-RCD-SCM-clocker bill of materials (BOM)

84 components, 34 distinct parts.

QtyPartRefs
2
40106BPWR
IC1, IC2
1
TL072
IC3
1
ATMEGA328
U1
1
16MHz
X1
11
PJ301M-12
J1-CLK-IN1, J2-OUT1, J3-OUT2, J4-OUT3, J5-OUT4, J6-OUT5, J7-OUT6, J8-OUT7 +3
1
HEADER-1X3-TH
5VSEL1
1
HEADER-1X6-TH
'DUINO1
1
HEADER-2x8-SMT
BREAKOUT1
3
HEADER-2X3-B2B-MALESMT
H4, H5, H6
3
HEADER-2X3-B2B-FEMALETH-BOT
H7, H8, H9
1
HEADER-2X3-SMT
ISP1
1
1x2-TH
JP1
1
HEADER-2X8-SMT
POWER1
1
solder-blob
RCD||SCM1
1
10k
TR24
1
78M05
VR1
1
78L09
VR2
1
White
LED1
1
Blue
LED2
2
Red or blue
LED3, LED9
Show 14 more
QtyPartRefs
2
Green
LED4, LED7
1
Red or green
LED5
2
Blue or green
LED6, LED8
3
BAT54S
D1, D2, D3
2
B140-E3
D4, D5
1
BEAD
L1
2
9pF
C1, C2
3
330pF
C3, C4, C5
3
47uF
C6, C7, C8
3
0.1uF
C9, C10, C11
3
470
R1, R2, R3
8
1k
R4, R5, R6, R7, R8, R9, R10, R11
11
10k
R12, R13, R14, R15, R16, R17, R18, R19 +3
4
470k
R22, R23, R24, R26

Pcb-RCD-SCM-clocker design files

The KiCad project lives in the 4ms/pcb-RCD-SCM-clocker repository on GitHub; these links point at the commit this page was built from.

Pcb-RCD-SCM-clocker: common questions

What microcontroller does the Pcb-RCD-SCM-clocker use?

The Pcb-RCD-SCM-clocker is built around the ATMEGA328, from the AVR/Arduino family.

How big is the Pcb-RCD-SCM-clocker?

The Pcb-RCD-SCM-clocker measures 39.6 × 110.9 mm and is 1.6 mm thick.

How many components are on the Pcb-RCD-SCM-clocker?

84 components, from 34 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pcb-RCD-SCM-clocker design files?

From the 4ms/pcb-RCD-SCM-clocker repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Pcb-RCD-SCM-clocker design in my own project?

The repository has no license, so all rights stay with 4ms. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pcb-RCD-SCM-clocker without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards