Nikon gps
About the Nikon gps PCB
Nikon gps is an open source PCB design by 4x1md, published on GitHub under the MIT license. It is a 2-layer board measuring 28 × 28 mm, with 35 components from 30 distinct parts.
Other key parts include the Hornet ORG1411, SN74LV1T08DCKR, C92637, TPS62203DBVR and SN74LVC1G14DBVR. By type, the board carries 11 resistors, 10 capacitors, 5 ICs, 3 diodes, 2 inductors and 1 transistor.
It belongs with the rf & radio designs in this gallery.
From the project
DIY GPS module for Nikon DSLR
This directory stores the latest version of the project. Currently, revision B of the PCB developped in KiCAD 5.1.
Main components on the Nikon gps
Nikon gps bill of materials (BOM)
35 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Hornet ORG1411 | ORG1411_GPS_ALT | U1 |
| 1 | SN74LV1T08DCKR 74AUP1T08 Texas Instruments | SOT-353_SC-70-5 | U2 |
| 1 | C92637 SN74LV1T126 Nexperia | SOT-23-5 | U3 |
| 1 | TPS62203DBVR TPS62203DBV Texas Instruments | SOT-23-5 | U4 |
| 1 | SN74LVC1G14DBVR 74LVC1G14 Texas Instruments | SOT-23-5 | U5 |
| 1 | L2N7002WT1G NMOS Leshan Radio | SOT-323_SC-70 | Q1 |
| 1 | 1x03 pads | Connection_Pads_03 | J1 |
| 1 | 0.1A | Fuse_0603 | F1 |
| 1 | ON/OFF | SW_SPST_PTS645_4pin | SW1 |
| 1 | C50676 Shottky Nexperia | D_SOD-523 | D1 |
| 2 | 17-21/GHC-YR1S2/3T Green Everlight Elec | LED_0805 | D2, D3 |
| 1 | GZ2012D601TF 600Ohm Sunlord | L_0805 | L1 |
| 1 | CB2012T100KR 10uH Tayio Yuden | L_0805 | L2 |
| 1 | CL21B105KBFNNNE 100nF Samsung | C_0805_NarrowPads | C1 |
| 1 | CL05C220JB5NNNC 18pF Samsung | C_0402 | C2 |
| 2 | CL05B104KO5NNNC 100nF Samsung | C_0402 | C3, C10 |
| 2 | CL10B104JB8NNNC 100nF Samsung | C_0603 | C4, C9 |
| 1 | CL21A475KAQNNNE 4.7uF Samsung | C_0805 | C5 |
| 1 | CL10B103JB8NNNC 1nF Samsung | C_0603 | C6 |
| 1 | CL10A106KP8NNNC 10uF Samsung | C_0805 | C7 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0805F225M500NT 100nF Guangdong Fenghua | C_0805 | C8 |
| 1 | 0603WAF1002T5E 10K Uniroyal Elec | R_0603 | R1 |
| 2 | 0603WAF330JT5E 33 Uniroyal Elec | R_0603 | R2, R6 |
| 2 | 0603WAF3302T5E 10K Uniroyal Elec | R_0603 | R3, R4 |
| 1 | 0603WAF3302T5E 22K Uniroyal Elec | R_0603 | R5 |
| 1 | 0603WAF3302T5E 33K Uniroyal Elec | R_0603 | R7 |
| 1 | 0603WAF1001T5E 4.7K Uniroyal Elec | R_0603 | R8 |
| 1 | 0603WAF1001T5E 33K Uniroyal Elec | R_0603 | R9 |
| 1 | 0603WAF4700T5E 330 Uniroyal Elec | R_0603 | R10 |
| 1 | 0603WAF3302T5E 100K Uniroyal Elec | R_0603 | R11 |
Nikon gps design files
The KiCad project lives in the 4x1md/nikon_gps repository on GitHub; these links point at the commit this page was built from.
Nikon gps: common questions
How big is the Nikon gps PCB?
The Nikon gps measures 28 × 28 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Nikon gps?
35 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Nikon gps design files?
From the 4x1md/nikon_gps repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Nikon gps design in my own project?
Yes, under the terms of its MIT license, which 4x1md chose for the repository.
Similar boards
Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
Open smartwatch light
Open-Smartwatch
36.1 × 36.1 mm51 parts4LGPL-3.0246
Open smartwatch gps
45 × 41 mm67 parts4LGPL-3.0241
Module17 HMI
M17-Project
97 × 80.9 mm49 parts4LCERN-OHL-W-2.0129