TI-USB-Audio-Devboard

77volatile77·TI-USB-Audio-Devboard·dac/dac.kicad_pcb

TI-USB-Audio-Devboard PCB layout, top view — open source board by 77volatile77

About the TI-USB-Audio-Devboard PCB

TI-USB-Audio-Devboard is an open source PCB design by 77volatile77, published on GitHub under the MIT license. It is a 4-layer board measuring 50 × 25 mm, with 32 components from 16 distinct parts.

Other key parts include the PCM2906C and SPX3819M5-L. By type, the board carries 13 capacitors, 11 resistors, 3 connectors, 2 ICs, 2 diodes and 1 crystal.

It belongs with the dev boards & breakouts and audio designs in this gallery.

From the project

A breadboard adapter for the PCM2906C: A USB 1.1 audio codec made by Texas Instruments. Note: the way the header pinout is defined, this board is only intended to be used as a DAC. However, you can choose to DNP the pull-down resistors on the VINR + VINL pins and solder jumpers o

A breadboard adapter for the PCM2906C: A USB 1.1 audio codec made by Texas Instruments. Note: the way the header pinout is defined, this board is only intended to be used as a DAC. However, you can choose to DNP the pull-down resistors on the VINR + VINL pins and solder jumpers onto the pad and use it that way.

You can either clone the project and view it on your copy of KiCad, or you can use KiCanvas to look at the schematics on the web.

TI-USB-Audio-Devboard, from the project README
From the project README

Main components on the TI-USB-Audio-Devboard

PCM2906CSPX3819M5-L

TI-USB-Audio-Devboard bill of materials (BOM)

32 components, 16 distinct parts.

QtyPartRefs
1
PCM2906C
U1
1
SPX3819M5-L
U2
1
12MHz
Y1
1
USB_B
J1
2
Conn_01x04_Pin
J2, J3
2
ESD321
D1, D2
3
10u
C1, C6, C12
7
1u
C2, C3, C4, C5, C7, C11, C13
2
20p
C8, C9
1
2n2
C10
2
22R
R1, R2
3
1k5
R3, R4, R6
1
1M
R5
1
DNP
R7
1
2.2
R8
3
10k
R9, R10, R11

TI-USB-Audio-Devboard design files

The KiCad project lives in the 77volatile77/TI-USB-Audio-Devboard repository on GitHub; these links point at the commit this page was built from.

TI-USB-Audio-Devboard: common questions

How big is the TI-USB-Audio-Devboard PCB?

The TI-USB-Audio-Devboard measures 50 × 25 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the TI-USB-Audio-Devboard?

32 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the TI-USB-Audio-Devboard design files?

From the 77volatile77/TI-USB-Audio-Devboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the TI-USB-Audio-Devboard design in my own project?

Yes, under the terms of its MIT license, which 77volatile77 chose for the repository.

Similar boards