RaceTemp BLE
911RSR·RaceTemp_BLE·HW/sensor_interface/sensor_interface.kicad_pcb
About the RaceTemp BLE PCB
RaceTemp BLE is an open source PCB design by 911RSR, published on GitHub. It is a 2-layer board measuring 22 × 40 mm, with 33 components from 19 distinct parts.
Other key parts include the 74LVC1G14 and MAX31856MUD+T. By type, the board carries 13 capacitors, 10 resistors, 3 connectors, 2 ICs, 2 test points and 1 diode.
It belongs with the sensors and iot & wireless designs in this gallery.
From the project
Like RaceTemp, but using STM32WB with integrated BLE instead of UART + an RF module.
A sensor interface PCB designed and ordered on NiNo's 22 years birthday. The PCB has four inputs: 1) RPM -- engine speed 2) EGT -- exhaust gas temperature 3) NTC1 -- water temperature 4) NTC2 -- cylinder head temperature

Main components on the RaceTemp BLE
RaceTemp BLE bill of materials (BOM)
33 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LVC1G14 | SOT-23-5_HandSoldering | U1 |
| 1 | MAX31856MUD+T MAX31856 Analog Devices | TSSOP-14_4.4x5mm_P0.65mm | U2 |
| 1 | Berg | PinHeader_1x09_P2.54mm_Vertical | J1 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_Horizontal | J2 |
| 1 | Screw_Terminal | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J4 |
| 2 | TestPoint | TestPoint_THTPad_4.0x4.0mm_Drill2.0mm | TP1, TP2 |
| 1 | TestPoint | TestPoint_THTPad_D4.0mm_Drill2.0mm | pickup1 |
| 1 | BAT54S EVVO | SOT-23 | D1 |
| 1 | 1k @ 100 MHz | R_0805_2012Metric | FB1 |
| 1 | CC0805JRNPOCBN100 10p YAGEO | C_0805_2012Metric | C1 |
| 1 | C0805C222KAGECAUTO 2.2n Kemet | C_0805_2012Metric | C2 |
| 5 | 100n | C_0805_2012Metric | C3, C5, C11, C12, C13 |
| 2 | 10u | C_0805_2012Metric | C4, C8 |
| 4 | 10n | C_0805_2012Metric | C6, C7, C9, C10 |
| 1 | CRCW08051M00FKEA 1M Vishay | R_0805_2012Metric | R1 |
| 1 | 47k | R_0805_2012Metric | R2 |
| 2 | 1M | R_0805_2012Metric | R3, R10 |
| 2 | 10k | R_0805_2012Metric | R4, R6 |
| 4 | 1k | R_0805_2012Metric | R5, R7, R8, R9 |
RaceTemp BLE design files
The KiCad project lives in the 911RSR/RaceTemp_BLE repository on GitHub; these links point at the commit this page was built from.
RaceTemp BLE: common questions
How big is the RaceTemp BLE PCB?
The RaceTemp BLE measures 22 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RaceTemp BLE?
33 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the RaceTemp BLE design files?
From the 911RSR/RaceTemp_BLE repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RaceTemp BLE design in my own project?
The repository has no license, so all rights stay with 911RSR. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k