22 open source boards using the 74LVC1G14

Real designs built with the 74LVC1G14, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

22 boardsClear filters|Most starred

How designs wire the 74LVC1G14

Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the 74LVC1G14 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 17 of 19 designs, most often 100 nF (then 10 µF).
  • Pin 2 has a series resistor on 12 of 19 designs, most often 470 kΩ (then 47 kΩ).
  • Pin 4 has a series resistor on 8 of 19 designs, most often 470 kΩ (then 1 kΩ).
NCpin 1Connected to: Not connected 100%
Pin 2Connected to: Signal 100%
  • Series resistor on 63% · 470 kΩ (4), 47 kΩ (2), 2 MΩ (1)
  • Capacitor to GND on 32% · 10 pF (1), 10 µF (1), 100 pF (1)
GNDpin 3Connected to: GND 100%
Pin 4Connected to: A connector 32%
  • Series resistor on 42% · 470 kΩ (4), 1 kΩ (2), 5.6 kΩ (1)
VCCpin 5Connected to: 3.3V 74% · a signal 26%
  • Decoupling capacitor on 89% · 100 nF (24), 10 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RadioThermal Soldering OSHW by RadioThermal, QI Charger by drewsum, MemBird - Woodcock by transistorfet and Neapolitan by Josephrp.

The 74LVC1G14 in open source designs

The gallery holds 22 open source boards using the 74LVC1G14 from 19 GitHub repositories; a typical one measures about 100.3 × 75 mm and carries around 79 components.

72% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.

The most starred is RadioThermal Soldering OSHW by RadioThermal.

Microcontrollers on boards using the 74LVC1G14

74LVC1G14: common questions

Where can I find a 74LVC1G14 reference design?

Each of the 22 boards on this page is a real design using the 74LVC1G14. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LVC1G14 VCC pin?

The VCC pin has a decoupling capacitor on 17 of 19 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 19 open source designs using the 74LVC1G14.

What resistor goes on the 74LVC1G14 pin 2?

Pin 2 has a series resistor on 12 of 19 designs, most often 470 kΩ (then 47 kΩ). Counted from the KiCad layouts of 19 open source designs using the 74LVC1G14.

What resistor goes on the 74LVC1G14 pin 4?

Pin 4 has a series resistor on 8 of 19 designs, most often 470 kΩ (then 1 kΩ). Counted from the KiCad layouts of 19 open source designs using the 74LVC1G14.

What parts are used alongside the 74LVC1G14?

The AP2553W6-7, MAX2837, MGA-81563, RFFC5072 and RX_HIGHPASS_FILTER appear in the most repositories here.

Which microcontrollers do boards using the 74LVC1G14 use?

Most are built on AVR/Arduino (1), ESP32 (1), FPGA (1) and PIC (1).

How big is a typical board using the 74LVC1G14?

The median is 100.3 × 75 mm, and 72% are two-layer designs.

What is the most popular open source board using the 74LVC1G14?

By GitHub stars, RadioThermal Soldering OSHW by RadioThermal, with 78 stars.

Can I simulate one of these boards using the 74LVC1G14 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part