OricMouse
About the OricMouse PCB
OricMouse is an open source PCB design by 986-Studio, published on GitHub. It is a 2-layer board measuring 85.1 × 71.1 mm, with 38 components from 18 distinct parts.
Other key parts include the P8X32A, 24C512, LD1117, 74LVC245 and 74LVC244. By type, the board carries 14 resistors, 6 ICs, 6 transistors, 6 connectors, 3 capacitors and 1 crystal.
From the project
OricMouse, an Expansion card to add Mouse to your Orices! (1, Atmos and Telestrat)
You will find both the hardware and firmware of this project in this repository.
OricMouse is an Open Source Hardware project.
Ready to order gerber can be found on OSHPark: https://oshpark.com/shared_projects/KOAZTB95
The correct license still need to be choosen, but please concidere it currently as something similar to the 4 clause BSD, share and use as wanted, but always tell from what your project is based, and who is the original author. Also if you make your own derived project, do not use the same name or a derived name. That mean that you can use the Oric name as I don't own this…
Main components on the OricMouse
OricMouse bill of materials (BOM)
38 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | P8X32A | DIP-40_W15.24mm | U1 |
| 1 | 24C512 | DIP-8_W7.62mm | U2 |
| 1 | LD1117 | TO-220_Neutral123_Horizontal | U3 |
| 1 | 74LVC245 | DIP-20_W7.62mm | U4 |
| 2 | 74LVC244 | DIP-20_W7.62mm | U5, U6 |
| 6 | BS170 | TO-92_Inline_Narrow_Oval | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | 5MHz | Crystal_HC50-U_Vertical | Y1 |
| 1 | CONN_02X17 | Pin_Header_Straight_2x17 | P1 |
| 1 | PROP PLUG | Pin_Header_Straight_1x04 | P2 |
| 1 | PS2/0 | MiniDIN6 | P3 |
| 1 | PS2 / 1 | MiniDIN6 | P4 |
| 1 | ADB | MiniDIN4 | P5 |
| 1 | EXPANSION | Pin_Header_Straight_2x04 | P6 |
| 1 | JUMPER | Pin_Header_Straight_1x02 | JP1 |
| 1 | RESET | SW_PUSH_SMALL | SW1 |
| 2 | 0.1uF | C_Rect_L7_W2.5_P5 | C1, C2 |
| 1 | 1uF | C_Rect_L7_W2.5_P5 | C3 |
| 14 | 10K | Resistor_Vertical_RM5mm | R1, R2, R3, R4, R5, R6, R7, R8 +6 |
OricMouse design files
The KiCad project lives in the 986-Studio/OricMouse repository on GitHub; these links point at the commit this page was built from.
OricMouse: common questions
How big is the OricMouse PCB?
The OricMouse measures 85.1 × 71.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OricMouse?
38 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the OricMouse design files?
From the 986-Studio/OricMouse repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the OricMouse design in my own project?
The repository has no license, so all rights stay with 986-Studio. Use it as a reference, and ask the author before reusing the design.