6 open source boards using the 24C512
Real designs built with the 24C512, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
SID MB
Ixox
99.1 × 99.1 mm89 parts2LNo license19OricMouse
986-Studio
85.1 × 71.1 mm38 parts2LNo license6STM32
Svelotracker
SL-RU
98.6 × 49.8 mm102 parts2LNo license1GQuintic-EEPROM-Header
synthetos
36.8 × 35.6 mm68 parts2LMIT1- schematic only · 39 partsESP32
CAPSTONE-2026
kolisahil2709
39 parts2LNo license0 24cxxx
SL-RU
23.9 × 17.3 mm4 parts2LNo license0
How designs wire the 24C512
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 24C512 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 4 is tied to GND on 4 of 5 designs.
- Pin 8 is tied to 3.3V on 4 of 5 designs.
- Pin 5 has a pull-up to 3.3V on 3 of 5 designs, most often 10 kΩ (then 5.1 kΩ).
- Pin 6 has a pull-up to 3.3V on 3 of 5 designs, most often 10 kΩ (then 5.1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: GND 60% · a signal 40% | — |
| Pin 2 | Connected to: GND 60% · a signal 40% | — |
| Pin 4 | Connected to: GND 80% · a signal 20% | — |
| Pin 5 | Connected to: A connector 80% |
|
| Pin 6 | Connected to: A connector 80% |
|
| Pin 7 | Connected to: GND 60% · a signal 40% | — |
| Pin 8 | Connected to: 3.3V 80% · a signal 20% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SID MB by Ixox, OricMouse by 986-Studio, Svelotracker by SL-RU and GQuintic-EEPROM-Header by synthetos.
The 24C512 in open source designs
The gallery holds 6 open source boards using the 24C512 from 6 GitHub repositories; a typical one measures about 85.1 × 49.8 mm and carries around 54 components.
100% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is SID MB by Ixox.
What boards using the 24C512 are built for
24C512: common questions
Where can I find a 24C512 reference design?
Each of the 6 boards on this page is a real design using the 24C512. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 24C512 pin 4 connected?
Pin 4 is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 24C512.
How is the 24C512 pin 8 connected?
Pin 8 is tied to 3.3V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 24C512.
What pull-up resistor is used on the 24C512 pin 5?
Pin 5 has a pull-up to 3.3V on 3 of 5 designs, most often 10 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 5 open source designs using the 24C512.
Which microcontrollers do boards using the 24C512 use?
Most are built on ESP32 (1), PIC (1) and STM32 (1).
How big is a typical board using the 24C512?
The median is 85.1 × 49.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the 24C512?
By GitHub stars, SID MB by Ixox, with 19 stars.
Can I simulate one of these boards using the 24C512 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.