55 open source boards using the 74LVC245
Real designs built with the 74LVC245, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Apple II VGA Card
markadev
112.4 × 74.2 mm28 parts2LMIT206Raspberry Pi
Apple2-IO-RPi
tjboldt
89.5 × 77.5 mm24 parts2LMIT138MSX Goauld Rev4
jabadiagm
33.3 × 54.6 mm17 parts4LGPL-3.098ISA FPGA v2
robfinch
223.3 × 120.1 mm104 parts4LNo license78Amiga-N2630
jasonsbeer
318.4 × 124.5 mm231 parts4LNo license69Multicomp6809
nealcrook
170 × 145 mm115 parts2LNo license63RP2040/RP2350
Pro rev1
TheRetroWeb
102.6 × 107.3 mm130 parts4LCERN-OHL-P-2.058RIDE
LIV2
82.3 × 37.2 mm62 parts4LNo license17CIDER
LIV2
74.9 × 57.2 mm68 parts4LGPL-2.011RP2040/RP2350
Kim-1-programmable memory
eduardocasino
107.5 × 75.4 mm42 parts2LMIT11Ppeb re
dabonetn
115.7 × 56.5 mm26 parts2LNo license11RP2040/RP2350
X68KFDPi2W
aotta
86.3 × 106.4 mm29 parts2LGPL-3.010RP2040/RP2350
PZ1 Pico
NollKollTroll
99.1 × 73.7 mm21 parts4LCustom license10STM32
Hdmilight v3
esar
100 × 100 mm249 parts2LGPL-2.08MSX FPGA Hat
costarc
99.9 × 64 mm40 parts2LMIT7STM32
OpenDrive-Programmer
soniccd123
83.3 × 92.7 mm48 parts2LNo license6OricMouse
986-Studio
85.1 × 71.1 mm38 parts2LNo license6FPGA
AmigaPCI-LBC040
AmigaPCI
159.5 × 96.5 mm124 parts6LNo license3STM32
IPCMemoryExpansion
MattisLind
185 × 116 mm112 parts2LMIT3TI MSP430/CC
WALL-E
akrivka
102.6 × 150 mm92 parts2LNo license3RP2040/RP2350
AppleII-VGA markadev
Toysoft
172.7 × 69.1 mm33 parts2LMIT3- schematic only · 30 partsRP2040/RP2350
PerryFi2
SanPollo
30 partsNo license3 RP2040/RP2350
We816-mark2
danwerner21
360.1 × 141.4 mm128 parts2LNo license1M6809-multicomputer
cartheur
170 × 145 mm111 parts2LMIT1RP2040/RP2350
Msx pulse
tarinaroope
99.9 × 127.5 mm69 parts2LMIT1RP2040/RP2350
AppleII-VGA
Toysoft
172.7 × 69.1 mm33 parts2LMIT1RP2040/RP2350
Apple II VGA Card
Toysoft
112.4 × 74.2 mm28 parts2LMIT1RP2040/RP2350
Apple II VGA Card
Toysoft
112.4 × 74.2 mm28 parts2LMIT1NXP
Interface36
shirriff
86 × 50 mm16 parts2LNo license1FPGA
Zx50 MemoryCard RevC1
mmosko
132.1 × 108 mm172 parts6LNo license0ESP32
Mw cart
jfryman
83.8 × 51 mm50 parts2LNo license0RP2040/RP2350
AppleII-VGA-2
hexadevti
172.7 × 69.1 mm33 parts2LMIT0NXP
Intellicart
intelliputer
68.1 × 98.9 mm22 parts2LGPL-3.00MSX-IDE 2021
jabadiagm
55.3 × 64.8 mm15 parts2LGPL-3.098ISA FPGA CPU
robfinch
263.9 × 114.8 mm98 parts2LNo license78ESP32
NextTRS
apuder
145.7 × 107.8 mm93 parts2LGPL-3.074
How designs wire the 74LVC245
Read from the KiCad layouts of 43 open source designs, one per repository: what each pin of the 74LVC245 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 29 of 43 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 98% | — |
| CEpin 19 | Connected to: The microcontroller 26% · GND 44% |
|
| VCCpin 20 | Connected to: 3.3V 98% |
|
17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Apple II VGA Card by markadev, Apple2-IO-RPi by tjboldt, MSX Goauld Rev4 by jabadiagm and FPGABoard by robfinch.
The 74LVC245 in open source designs
The gallery holds 55 open source boards using the 74LVC245 from 44 GitHub repositories; a typical one measures about 106.3 × 90.6 mm and carries around 38 components.
74% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.
The most starred is Apple II VGA Card by markadev.
Parts used alongside the 74LVC245
Microcontrollers on boards using the 74LVC245
What boards using the 74LVC245 are built for
74LVC245: common questions
Where can I find a 74LVC245 reference design?
Each of the 55 boards on this page is a real design using the 74LVC245. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LVC245 VCC pin?
The VCC pin has a decoupling capacitor on 29 of 43 designs, most often 100 nF. Counted from the KiCad layouts of 43 open source designs using the 74LVC245.
What parts are used alongside the 74LVC245?
The Pico, 74LVC244, 74HCT245, AMS1117-3.3 and 74HCT244 appear in the most repositories here.
Which microcontrollers do boards using the 74LVC245 use?
Most are built on RP2040/RP2350 (16), NXP (4), STM32 (3) and FPGA (3).
How big is a typical board using the 74LVC245?
The median is 106.3 × 90.6 mm, and 74% are two-layer designs.
What is the most popular open source board using the 74LVC245?
By GitHub stars, Apple II VGA Card by markadev, with 206 stars.
Can I simulate one of these boards using the 74LVC245 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.