Macropd

aaravmanocha36·Macropd

Macropd

About the Macropd PCB

Macropd is an open source RP2040/RP2350 PCB design by aaravmanocha36, published on GitHub. It is a board, with 9 components from 2 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 8 switches and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

Making a customizable Macropad for quick operations on PCB. you will find all the PCB files

Main components on the Macropd

Macropd bill of materials (BOM)

9 components, 2 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
8
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8

Macropd design files

The KiCad project lives in the aaravmanocha36/Macropd repository on GitHub; these links point at the commit this page was built from.

Macropd: common questions

What microcontroller does the Macropd use?

The Macropd is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How many components are on the Macropd?

9 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Macropd design files?

From the aaravmanocha36/Macropd repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Macropd design in my own project?

The repository has no license, so all rights stay with aaravmanocha36. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Macropd without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards