PulseWatch
abendezu10·PulseWatch·KiCad/Health_Watch/Health_Watch.kicad_pcb
About the PulseWatch PCB
PulseWatch is an open source STM32 PCB design by abendezu10, published on GitHub. It is a 4-layer board measuring 40 × 30 mm, with 33 components from 19 distinct parts.
Its main chip is the STM32L476RGT6, from the STM32 family. Other key parts include the MCP73831T-2ACI/OT and MIC5365-3.3YD5-TR. By type, the board carries 15 capacitors, 8 resistors, 3 ICs, 3 connectors, 2 crystals and 2 diodes.
It belongs with the wearables and sensors designs in this gallery.
From the project
Developed a fully functional smartwatch using an STM32 microcontroller, featuring real-time heart rate monitoring. Utilized SPI and I2C communication protocols to interface with biometric sensors and other peripherals, ensuring efficient data transmission and system performance.
Main components on the PulseWatch
PulseWatch bill of materials (BOM)
33 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831T-2ACI/OT MCP73831-2-OT Microchip Technology | SOT-23-5 | U1 |
| 1 | MIC5365-3.3YD5-TR MIC5365-3.3YD5 Microchip Technology | SOT-23-5 | U2 |
| 1 | STM32L476RGT6 STM32L476RGTx STMicroelectronics | LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | ECS-2016MV-080-DN-TR 8MHz ECS | Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | FC-135R 32.7680KA-A3 32KHz Epson Timing | Crystal_SMD_EuroQuartz_EQ161-2Pin_3.2x1.5mm | X2 |
| 1 | S2B-PH-K-S JST-PH-Conn JST Sales America Inc. | CONN_S2B-PH-K-S_JST | J1 |
| 1 | USB4125-GF-A USB_C_Receptacle_PowerOnly_6P GCT | USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal | J2 |
| 1 | CONN_01X11 Conn_01x11 | 01x10_Conn_Hole | J4 |
| 1 | ZHCS350TA D_Schottky Diodes Incorporated | D_SOD-523 | D1 |
| 1 | ESD9B5.0ST5G TVS Diode onsemi | D_SOD-923 | D2 |
| 4 | LMK107BJ475KA-T 4u7 TAIYO YUDEN | C_0603_1608Metric | C1, C8, C9, C10 |
| 6 | 0402X7R104KT7AT 100n KYOCERA AVX | C_0402_1005Metric | C2, C3, C4, C5, C6, C11 |
| 1 | TMK212BBJ106KG8T 10u TAIYO YUDEN | C_0805_2012Metric | C7 |
| 2 | C0402C200F5GACTU 20p KEMET | C_0402_1005Metric | C12, C13 |
| 2 | MBASU105SCH100JFNA01 10p TAIYO YUDEN | C_0402_1005Metric | C14, C15 |
| 3 | MCS04020C5101FE000 5k1 Vishay / Beyschlag | R_0402_1005Metric | R1, R2, R3 |
| 2 | CRCW060310K0FKEA 10k Vishay / Dale | R_0603_1608Metric | R4, R7 |
| 2 | CRCW04024K70FKEDC 4k7 Vishay / Dale | R_0402_1005Metric | R5, R6 |
| 1 | ERJ-PA3F3900V 390R Panasonic | R_0603_1608Metric | R9 |
PulseWatch design files
The KiCad project lives in the abendezu10/PulseWatch repository on GitHub; these links point at the commit this page was built from.
PulseWatch: common questions
What microcontroller does the PulseWatch use?
The PulseWatch is built around the STM32L476RGT6, from the STM32 family.
How big is the PulseWatch PCB?
The PulseWatch measures 40 × 30 mm, has 4 copper layers and is 1.586 mm thick.
How many components are on the PulseWatch?
33 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PulseWatch design files?
From the abendezu10/PulseWatch repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PulseWatch design in my own project?
The repository has no license, so all rights stay with abendezu10. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PulseWatch without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k