198 open source boards using the MCP73831T-2ACI/OT
Real designs built with the MCP73831T-2ACI/OT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Esp rust board
esp-rs
22.9 × 63.5 mm48 parts2LNo license648Open smartwatch light
Open-Smartwatch
36.1 × 36.1 mm51 parts4LGPL-3.0248Open smartwatch gps
Open-Smartwatch
45 × 41 mm67 parts4LGPL-3.0242ESP32
Plantpal
teapotlaboratories
38.4 × 128.5 mm109 parts4LMIT98ESP32
Co2-canary
blinry
61 × 61 mm50 parts2LNo license78Feather rak3172
teapotlaboratories
51 × 23.1 mm44 parts2LMIT43ESP32
SAM32
maholli
53.4 × 23.4 mm50 partsNo license42ESP32
Badge2017
cryptovillage
95.2 × 154.5 mm129 parts2LNo license31ESP32
Electronics-Design-Exploiteers-Hacker-Pager
exploiteers
108.5 × 79 mm181 parts4LCERN-OHL-S-2.027FPGA
ICE40-fpga
joshajohnson
50 × 22.9 mm62 parts2LCC-BY-NC-4.026ESP32
Wakeboard
alexspurling
33.6 × 56.4 mm32 parts2LNo license21NXP
Vindor
ftrias
264 × 34 mm90 parts2LCustom license19Microchip SAM
MKRZero V5.0
hulkco
61.5 × 25 mm91 partsNo license15Nordic nRF
Jalapeno
GeeWizWow
230.1 × 77.6 mm184 parts2LCC-BY-NC-4.013Microchip SAM
Firefish
pimbongaerts
72.2 × 42.8 mm95 parts2LCustom license13ESP32
PCB-Mini-Environmental-Sensor
MbFredys
25.1 × 25.2 mm32 parts2LCERN-OHL-W-2.013Dc25 spqr badge
netik
152.7 × 76.7 mm109 parts2LApache-2.011RP2040/RP2350
Adafruit ESP32 Feather V2
cgallizzi
50.8 × 22.9 mm51 parts2LMIT11ESP32
Crimpdeq
crimpdeq
23 × 63.8 mm46 parts2LCustom license9Nordic nRF
Dragon joke
DC801
126 × 100.4 mm83 parts2LNo license8ESP32
ESP32-C3-DevKit-RUST-1
swayerloren
22.9 × 63.5 mm48 parts2LMIT8Tympan Rev C Hardware
Tympan
38.5 × 97.6 mm78 parts4LMIT7Microchip SAM
Dropkick
rrainey
44.5 × 50.8 mm45 parts2LMIT7Microchip SAM
Blinky Bowtie
joshajohnson
142.7 × 72 mm95 parts2LGPL-3.05ESP32
Open telegraph
animesh-chouhan
48 × 65.5 mm39 parts2LCERN-OHL-S-2.05Kiisu smol
kiisu-io
34 × 34 mm8 parts2LCERN-OHL-S-2.05ESP32
Tiny2048
thip
50 × 50 mm51 parts2LCC-BY-NC-4.04ESP32
ESP32-C3-DevKit-RUST-1
xutianq999
22.9 × 63.5 mm48 parts2LCERN-OHL-P-2.04STM32
TeleSTERN
shorlee
90 × 45 mm293 parts6LGPL-3.03STM32
Zirconia
viola0222
39 × 91 mm90 parts2LApache-2.03ESP32
DC-34-Badge
Cyber-Professionals-Enthusiast-Club
145.2 × 203.4 mm87 parts2LNo license3ESP32
Posture-Tracker-Using-ESP32
kiranj26
47.9 × 28.5 mm52 parts2LMIT3ESP32
Esp32s3-plant monitor
MuffinByteLabs
62.5 × 44.5 mm51 parts4LCERN-OHL-P-2.03Nordic nRF
Keyboard
GlassyBridge
314.3 × 137 mm356 parts2LMIT2ESP32
EmbeddedKeyboard
01binary
143.2 × 105.8 mm108 parts4LNo license2STM32
Dalws
anhldptit2610
64 × 43 mm72 parts4LMIT2
How designs wire the MCP73831T-2ACI/OT
Read from the KiCad layouts of 144 open source designs, one per repository: what each pin of the MCP73831T-2ACI/OT connects to, and the resistors, capacitors and other passives placed on it.
- The PROG pin has a resistor to GND on 123 of 144 designs, most often 2 kΩ (then 10 kΩ).
- The VBAT pin has a decoupling capacitor on 107 of 144 designs, most often 4.7 µF (then 10 µF).
- The VDD pin has a decoupling capacitor on 95 of 144 designs, most often 4.7 µF (then 10 µF).
- The STAT pin has a series resistor on 72 of 144 designs, most often 1 kΩ (then 470 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| STATpin 1 | Connected to: Signal 92% |
|
| VSSpin 2 | Connected to: GND 94% | — |
| VBATpin 3 | Connected to: VBAT 70% · a signal 29% |
|
| VDDpin 4 | Connected to: VBUS 75% · a signal 24% |
|
| PROGpin 5 | Connected to: Signal 97% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esp rust board by esp-rs, Open smartwatch light by Open-Smartwatch, Open smartwatch gps by Open-Smartwatch and Nome by blakesmith.
The MCP73831T-2ACI/OT in open source designs
The gallery holds 198 open source boards using the MCP73831T-2ACI/OT from 150 GitHub repositories; a typical one measures about 50 × 48.3 mm and carries around 51 components.
61% are two-layer designs, the rest use four layers or more, and 39% carry an open source license.
The most starred is Esp rust board by esp-rs.
Parts used alongside the MCP73831T-2ACI/OT
Microcontrollers on boards using the MCP73831T-2ACI/OT
What boards using the MCP73831T-2ACI/OT are built for
MCP73831T-2ACI/OT: common questions
Where can I find a MCP73831T-2ACI/OT reference design?
Each of the 198 boards on this page is a real design using the MCP73831T-2ACI/OT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the MCP73831T-2ACI/OT PROG pin?
The PROG pin has a resistor to GND on 123 of 144 designs, most often 2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 144 open source designs using the MCP73831T-2ACI/OT.
What decoupling capacitors do designs use on the MCP73831T-2ACI/OT VBAT pin?
The VBAT pin has a decoupling capacitor on 107 of 144 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 144 open source designs using the MCP73831T-2ACI/OT.
What decoupling capacitors do designs use on the MCP73831T-2ACI/OT VDD pin?
The VDD pin has a decoupling capacitor on 95 of 144 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 144 open source designs using the MCP73831T-2ACI/OT.
What parts are used alongside the MCP73831T-2ACI/OT?
The AP2112K-3.3TRG1, USBLC6-2SC6, XC6220B331MR-G, CH340E and DW01A appear in the most repositories here.
Which microcontrollers do boards using the MCP73831T-2ACI/OT use?
Most are built on ESP32 (68), STM32 (28), RP2040/RP2350 (24) and Nordic nRF (16).
How big is a typical board using the MCP73831T-2ACI/OT?
The median is 50 × 48.3 mm, and 61% are two-layer designs.
What is the most popular open source board using the MCP73831T-2ACI/OT?
By GitHub stars, Esp rust board by esp-rs, with 648 stars.
Can I simulate one of these boards using the MCP73831T-2ACI/OT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.