8 open source boards using the STM32L476RGT6
Real designs built with the STM32L476RGT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Hackboard
AdamTuraj
101 × 53.3 mm60 parts4LGPL-3.07STM32
MCU
Ironman-007
40 × 46.2 mm49 parts2LNo license1STM32
Dsv4
suzizecat
188 × 110 mm250 parts4LNo license0STM32
OSBAMS Rev2 RC1
hle12345
100 × 90 mm115 parts4LMIT0STM32
TSUMO BOT hardware
troyodia
97.7 × 58.5 mm93 parts4LNo license0STM32
STM32-Sumo-Robot-Controller
keer-nova74
97.7 × 58.5 mm93 parts4LNo license0STM32
PulseWatch
abendezu10
40 × 30 mm33 parts4LNo license0STM32
OSBAMS
hle12345
80 × 80 mm16 parts2LMIT0
How designs wire the STM32L476RGT6
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the STM32L476RGT6 connects to, and the resistors, capacitors and other passives placed on it.
- The PH0 pin has a crystal on 6 of 7 designs, most often 8 MHz (then 16 MHz).
- The PH0 pin has a capacitor to GND on 6 of 7 designs, most often 18 pF (then 15 pF).
- The VDDA pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
- The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 57% · not connected 29% |
|
| PC13pin 2 | Connected to: Not connected 71% · a signal 29% | — |
| PC14pin 3 | Connected to: A connector 29% |
|
| PC15pin 4 | Connected to: A connector 43% |
|
| PH0pin 5 | Connected to: Signal 86% |
|
| PH1pin 6 | Connected to: Signal 100% |
|
| NRSTpin 7 | Connected to: A connector 83% |
|
| PC1pin 9 | Connected to: Not connected 67% · a signal 33% | — |
| PC2pin 10 | Connected to: Not connected 67% · a signal 33% | — |
| PC3pin 11 | Connected to: Not connected 67% · a signal 33% | — |
| VSSApin 12 | Connected to: GND 100% | — |
| VDDApin 13 | Connected to: 3.3V 100% |
|
| VSSpin 18, 31, 47, 63 | Connected to: GND 100% | — |
| VDDpin 19, 32, 64 | Connected to: 3.3V 100% |
|
| PA5pin 21 | Connected to: A connector 83% |
|
| PB1pin 27 | Connected to: Not connected 67% · a signal 33% | — |
| PB10pin 29 | Connected to: A connector 83% |
|
| PB11pin 30 | Connected to: A connector 83% |
|
| PC8pin 39 | Connected to: Not connected 67% · a signal 33% | — |
| PC9pin 40 | Connected to: Not connected 67% · a signal 33% |
|
| PA10pin 43 | Connected to: Not connected 67% · a signal 33% | — |
| VDDUSBpin 48 | Connected to: 3.3V 83% · not connected 17% |
|
| PC12pin 53 | Connected to: Not connected 67% · a signal 33% | — |
| PD2pin 54 | Connected to: Not connected 83% · a signal 17% | — |
| PB5pin 57 | Connected to: Not connected 67% · a signal 33% | — |
| PB6pin 58 | Connected to: Not connected 67% · a signal 33% | — |
| PB7pin 59 | Connected to: Not connected 67% · a signal 33% | — |
| BOOT0pin 60 | Connected to: Signal 100% |
|
| PB8pin 61 | Connected to: Not connected 67% · a signal 33% | — |
30 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hackboard by AdamTuraj, MCU by Ironman-007, PulseWatch by abendezu10 and OSBAMS PCB by hle12345.
The STM32L476RGT6 in open source designs
The gallery holds 8 open source boards using the STM32L476RGT6 from 7 GitHub repositories; a typical one measures about 97.7 × 58.5 mm and carries around 77 components.
75% use four copper layers or more, and 38% carry an open source license.
The most starred is Hackboard by AdamTuraj.
Parts used alongside the STM32L476RGT6
Microcontrollers on boards using the STM32L476RGT6
What boards using the STM32L476RGT6 are built for
STM32L476RGT6: common questions
Where can I find a STM32L476RGT6 reference design?
Each of the 8 boards on this page is a real design using the STM32L476RGT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32L476RGT6 PH0 pin connected?
The PH0 pin has a crystal on 6 of 7 designs, most often 8 MHz (then 16 MHz). Counted from the KiCad layouts of 7 open source designs using the STM32L476RGT6.
What decoupling capacitors do designs use on the STM32L476RGT6 VDDA pin?
The VDDA pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the STM32L476RGT6.
What decoupling capacitors do designs use on the STM32L476RGT6 VDD pin?
The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the STM32L476RGT6.
What parts are used alongside the STM32L476RGT6?
The USBLC6-2SC6, AMS1117-3.3, RT8259, TB6612FNG and TPS2116DRL appear in the most repositories here.
Which microcontrollers do boards using the STM32L476RGT6 use?
Most are built on STM32 (8).
How big is a typical board using the STM32L476RGT6?
The median is 97.7 × 58.5 mm, and 25% are two-layer designs.
What is the most popular open source board using the STM32L476RGT6?
By GitHub stars, Hackboard by AdamTuraj, with 7 stars.
Can I simulate one of these boards using the STM32L476RGT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.