7 open source boards using the MIC5365-3.3YD5-TR
Real designs built with the MIC5365-3.3YD5-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Stm32-bt board
OdaiJ
48 × 33 mm53 parts4LNo license1STM32
A.ProdDeck
arsovskiteodor
117 × 77 mm61 parts4LNo license0STM32
SAFE-ROOM
dibreyjonatan
55.5 × 32 mm52 parts4LGPL-3.00STM32
STM32WB-DEV-BOARD
MohamedSharfi
30.2 × 50 mm48 parts4LNo license0STM32
ECE5780-Project
DinaliAssylbek
31.9 × 16.3 mm46 parts4LNo license0STM32
PulseWatch
abendezu10
40 × 30 mm33 parts4LNo license0STM32
Flying byte v1
PanBabinicz
52 × 25 mm43 parts4LNo license0
How designs wire the MIC5365-3.3YD5-TR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MIC5365-3.3YD5-TR connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 7 of 7 designs, most often 4.7 µF (then 1 µF).
- The VOUT pin has a decoupling capacitor on 6 of 7 designs, most often 4.7 µF.
- The EN pin is tied to 5V on 5 of 7 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 71% · a signal 29% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| ENpin 3 | Connected to: 5V 71% · a signal 29% | — |
| NCpin 4 | Connected to: Not connected 100% | — |
| VOUTpin 5 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Stm32-bt board by OdaiJ, PulseWatch by abendezu10, A.ProdDeck by arsovskiteodor and SAFE-ROOM by dibreyjonatan.
The MIC5365-3.3YD5-TR in open source designs
The gallery holds 7 open source boards using the MIC5365-3.3YD5-TR from 7 GitHub repositories; a typical one measures about 48 × 32 mm and carries around 48 components.
100% use four copper layers or more, and 14% carry an open source license.
The most starred is Stm32-bt board by OdaiJ.
Parts used alongside the MIC5365-3.3YD5-TR
Microcontrollers on boards using the MIC5365-3.3YD5-TR
What boards using the MIC5365-3.3YD5-TR are built for
MIC5365-3.3YD5-TR: common questions
Where can I find a MIC5365-3.3YD5-TR reference design?
Each of the 7 boards on this page is a real design using the MIC5365-3.3YD5-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MIC5365-3.3YD5-TR VIN pin?
The VIN pin has a decoupling capacitor on 7 of 7 designs, most often 4.7 µF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the MIC5365-3.3YD5-TR.
What decoupling capacitors do designs use on the MIC5365-3.3YD5-TR VOUT pin?
The VOUT pin has a decoupling capacitor on 6 of 7 designs, most often 4.7 µF. Counted from the KiCad layouts of 7 open source designs using the MIC5365-3.3YD5-TR.
How is the MIC5365-3.3YD5-TR EN pin connected?
The EN pin is tied to 5V on 5 of 7 designs (a signal on 2). Counted from the KiCad layouts of 7 open source designs using the MIC5365-3.3YD5-TR.
What parts are used alongside the MIC5365-3.3YD5-TR?
The USBLC6-2SC6, STM32WB55CEU6 and MCP73831T-2ACI/OT appear in the most repositories here.
Which microcontrollers do boards using the MIC5365-3.3YD5-TR use?
Most are built on STM32 (7).
How big is a typical board using the MIC5365-3.3YD5-TR?
The median is 48 × 32 mm, and 0% are two-layer designs.
What is the most popular open source board using the MIC5365-3.3YD5-TR?
By GitHub stars, Stm32-bt board by OdaiJ, with 1 stars.
Can I simulate one of these boards using the MIC5365-3.3YD5-TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.