Solar-MPPT-Charger-CN3791-

Abhi90808·Solar-MPPT-Charger-CN3791-

Solar-MPPT-Charger-CN3791- PCB layout, top view — open source board by Abhi90808

About the Solar-MPPT-Charger-CN3791- PCB

Solar-MPPT-Charger-CN3791- is an open source PCB design by Abhi90808, published on GitHub. It is a 2-layer board measuring 50.7 × 38.5 mm, with 33 components from 20 distinct parts.

Other key parts include the CN3791. By type, the board carries 11 resistors, 10 capacitors, 5 diodes, 4 connectors, 1 IC and 1 inductor.

It belongs with the power & battery designs in this gallery.

From the project

Solar Li-ion battery charger PCB using the CN3791 MPPT IC, optimized for single-cell charging from small solar panels with automatic maximum power point tracking.

A solar Li-ion battery charger PCB using the CN3791 MPPT IC, designed in KiCad 8. Optimized for single-cell Li-ion charging from small solar panels with automatic maximum power point tracking.

The CN3791 tracks the solar panel's maximum power point using a resistor-set voltage reference on the MPPT pin. It implements CC/CV charging — constant current until the battery reaches 4.2V, then switches to constant voltage. This ensures the solar panel always operates near its peak power output regardless of battery state.

Main components on the Solar-MPPT-Charger-CN3791-

Solar-MPPT-Charger-CN3791- bill of materials (BOM)

33 components, 20 distinct parts.

QtyPartRefs
1
CN3791
U1
1
SOLAR_INPUT
J1
1
BATTERY
J2
1
CE_CTRL
J3
1
NTC_CONN
J4
1
10k_NTC
NTC1
2
1N5819
D1, D3
1
SS34
D2
1
RED
D4
1
GREEN
D5
1
10uH
L1
3
100uF
C1, C6, C8
5
100nf
C2, C5, C7, C9, C10
1
10nf
C3
1
10uF
C4
1
100k
R1
1
39k
R2
6
10k
R3, R5, R6, R9, R10, R11
1
0.1R
R4
2
4.7k
R7, R8

Solar-MPPT-Charger-CN3791- design files

The KiCad project lives in the Abhi90808/Solar-MPPT-Charger-CN3791- repository on GitHub; these links point at the commit this page was built from.

Solar-MPPT-Charger-CN3791-: common questions

How big is the Solar-MPPT-Charger-CN3791- PCB?

The Solar-MPPT-Charger-CN3791- measures 50.7 × 38.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Solar-MPPT-Charger-CN3791-?

33 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the Solar-MPPT-Charger-CN3791- design files?

From the Abhi90808/Solar-MPPT-Charger-CN3791- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Solar-MPPT-Charger-CN3791- design in my own project?

The repository has no license, so all rights stay with Abhi90808. Use it as a reference, and ask the author before reusing the design.

Similar boards