MCU-Datalogger

AbhiramV010·MCU-Datalogger·DataLogger/DataLogger.kicad_pcb

MCU-Datalogger PCB layout, top view — open source AVR/Arduino board by AbhiramV010

About the MCU-Datalogger PCB

MCU-Datalogger is an open source AVR/Arduino PCB design by AbhiramV010, published on GitHub. It is a 2-layer board measuring 82 × 51 mm, with 25 components from 18 distinct parts.

Its main chip is the ATMEGA328P-AU, from the AVR/Arduino family. Other key parts include the 24LC1025 and DS1337. By type, the board carries 7 resistors, 5 capacitors, 4 ICs, 4 connectors, 2 crystals and 2 diodes.

From the project

A simple MCU Datalogger, with a 512K EEPROM & time module. EEPROM code is included.

Main components on the MCU-Datalogger

MCU-Datalogger bill of materials (BOM)

25 components, 18 distinct parts.

QtyPartRefs
2
24LC1025
U1, U2
1
DS1337
U3
1
ATMEGA328P-AU
U4
1
32.768 KHz
Y1
1
16MHz
Y2
2
Conn_01x04_Pin
J1, J2
1
Conn_01x09_Pin
J3
1
Conn_02x03_Odd_Even
J4
1
Battery
BT1
1
LED
D1
1
LED
D2
1
0.1uF
C1
2
22pF
C2, C3
1
0.1uF
C4
1
100nF
C5
3
10k
R1, R5, R6
2
330
R2, R7
2
4.7k
R3, R4

MCU-Datalogger design files

The KiCad project lives in the AbhiramV010/MCU-Datalogger repository on GitHub; these links point at the commit this page was built from.

MCU-Datalogger: common questions

What microcontroller does the MCU-Datalogger use?

The MCU-Datalogger is built around the ATMEGA328P-AU, from the AVR/Arduino family.

How big is the MCU-Datalogger PCB?

The MCU-Datalogger measures 82 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MCU-Datalogger?

25 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the MCU-Datalogger design files?

From the AbhiramV010/MCU-Datalogger repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MCU-Datalogger design in my own project?

The repository has no license, so all rights stay with AbhiramV010. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MCU-Datalogger without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards