Nano2A

AbstractMelon·Nano2A·PCB/PCB.kicad_pcb

Nano2A PCB layout, top view — open source board by AbstractMelon

About the Nano2A PCB

Nano2A is an open source PCB design by AbstractMelon, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 13.8 × 15 mm, with 28 components from 22 distinct parts.

Other key parts include the TPS7B6933, A7106 and PY32F030F18P6. By type, the board carries 14 capacitors, 3 ICs, 3 inductors, 3 resistors, 2 diodes and 1 crystal.

It belongs with the power & battery designs in this gallery.

From the project

An open-source micro AFHDS2A (FlySky) receiver.

An open-source micro AFHDS2A (FlySky) receiver.

- Protocol: AFHDS2A (FlySky) - Outputs: PWM (3ch) - Input voltage: 6.4–22.2V (2S–6S LiPo) - Weight: < 3g - Size: 13.75×15mm PCB - Range: 300m+ (open field) - Telemetry: Battery voltage sensing (ADC) - Cost: ~$1.81 BOM + ~$0.4 PCB (~$2.20/unit)

Main components on the Nano2A

TPS7B6933A7106PY32F030F18P6

Nano2A bill of materials (BOM)

28 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS7B6933
U1
1
A7106
U2
1
PY32F030F18P6
U3
1
16MHz
Y1
1
Conn_01x05_Pin
J1
1
RFANT3216120A5T
ANT1
1
SMAJ26A
D1
1
LED
D2
1
2.7nH
L1
2
4.7nH
L2, L3
2
8.2pF
C2, C3
1
10pF
C4
5
100nF
C6, C11, C12, C13, C14
1
10µF
C7
1
1µF
C8
1
1.5nF
C10
1
22pF
C15
1
1pF
C16
1
100n
C17
1
68k
R2
Show 2 more
QtyPartRefs
1
10k
R3
1
200Ω
R4

Nano2A design files

The KiCad project lives in the AbstractMelon/Nano2A repository on GitHub; these links point at the commit this page was built from.

Nano2A: common questions

How big is the Nano2A PCB?

The Nano2A measures 13.8 × 15 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Nano2A?

28 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Nano2A design files?

From the AbstractMelon/Nano2A repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Nano2A design in my own project?

Yes, under the terms of its GPL-3.0 license, which AbstractMelon chose for the repository.

Similar boards