HardLabs

Atmega16 breakout

abzman·small-useful-PCBs·Atmega16 breakout/Atmega16 breakout.kicad_pcb

Atmega16 breakout layout, top view — open source AVR/Arduino board by abzman
Simulate this board

About the Atmega16 breakout

Atmega16 breakout is an open source AVR/Arduino PCB design by abzman, published on GitHub under the Unlicense license. It is a 2-layer board measuring 111.8 × 88.9 mm, with 44 components from 32 distinct parts.

Its main chip is the ATmega16A-P, from the AVR/Arduino family. Other key parts include the AZ1117-3.3, AZ1117-5.0 and NLV17SZ17DFT2G. By type, the board carries 16 connectors, 14 capacitors, 5 resistors, 4 ICs, 3 diodes and 1 crystal.

It belongs with the dev boards & breakouts designs in this gallery.

Main components on the Atmega16 breakout

AZ1117-3.3AZ1117-5.0NLV17SZ17DFT2GATmega16A-P

Atmega16 breakout bill of materials (BOM)

44 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AZ1117-3.3
IC1
1
AZ1117-5.0
IC2
1
NLV17SZ17DFT2G
IC5
1
ATmega16A-P
IC7
1
16 MHz
X2
1
KMDGX-9S-BS-1
Barrel_Jack_Switch
J1
1
ISP
J2
1
JTAG
J3
1
Vcc Select
J4
1
FTDI power
J5
1
FTDI connector
J6
6
Conn_01x05
J7, J8, J9, J10, J11, J12
1
AVCC Jumper
J13
1
Conn_01x40
J14
1
12V
Conn_01x40
J15
1
LED buffer bypass
J16
1
Reset
SW1
1
1N4148
Power
D1
1
1N4148
User
D2
1
1N4148
1N4007
D5
Show 12 more
QtyPartRefs
1
100NF
10uF
C1
2
100NF
0.1uF
C2, C3
1
150UF
10uF
C4
6
0.1uF
C5, C6, C12, C13, C14, C17
1
10uF
C7
1
1nF
C8
2
22p
C15, C16
1
100
2.2k
R1
1
470
2.2k
R2
1
680
100k
R6
1
4.7K
10k
R7
1
4.7K
10k
R8

Atmega16 breakout design files

The KiCad project lives in the abzman/small-useful-PCBs repository on GitHub; these links point at the commit this page was built from.

Atmega16 breakout: common questions

What microcontroller does the Atmega16 breakout use?

The Atmega16 breakout is built around the ATmega16A-P, from the AVR/Arduino family.

How big is the Atmega16 breakout?

The Atmega16 breakout measures 111.8 × 88.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Atmega16 breakout?

44 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Atmega16 breakout design files?

From the abzman/small-useful-PCBs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Atmega16 breakout design in my own project?

Yes, under the terms of its Unlicense license, which abzman chose for the repository.

Can I test firmware for the Atmega16 breakout without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in small-useful-PCBs

Similar boards