HardLabs

Pi-Pico-Keyboard

achen2304·Pi-Pico-Keyboard·Keyboard 25% V2/Keyboard 25% V2.kicad_pcb

Pi-Pico-Keyboard PCB layout, top view — open source RP2040/RP2350 board by achen2304

About the Pi-Pico-Keyboard PCB

Pi-Pico-Keyboard is an open source RP2040/RP2350 PCB design by achen2304, published on GitHub. It is a 2-layer board measuring 147.6 × 102.2 mm, with 39 components from 3 distinct parts.

Its main chip is the Raspberry_Pi_Pico, from the RP2040/RP2350 family. By type, the board carries 19 switches, 19 diodes and 1 IC.

It belongs with the keyboards designs in this gallery.

From the project

keyboard powered by a pi pico

Main components on the Pi-Pico-Keyboard

Raspberry_Pi_Pico

Pi-Pico-Keyboard bill of materials (BOM)

39 components, 3 distinct parts.

QtyPartRefs
1
Raspberry_Pi_Pico
U1
19
Keyswitch
S1, S2, S3, S4, S5, S6, S7, S8 +11
19
Diode
D1, D2, D3, D4, D5, D6, D7, D8 +11

Pi-Pico-Keyboard design files

The KiCad project lives in the achen2304/Pi-Pico-Keyboard repository on GitHub; these links point at the commit this page was built from.

Pi-Pico-Keyboard: common questions

What microcontroller does the Pi-Pico-Keyboard use?

The Pi-Pico-Keyboard is built around the Raspberry_Pi_Pico, from the RP2040/RP2350 family.

How big is the Pi-Pico-Keyboard PCB?

The Pi-Pico-Keyboard measures 147.6 × 102.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pi-Pico-Keyboard?

39 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pi-Pico-Keyboard design files?

From the achen2304/Pi-Pico-Keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pi-Pico-Keyboard design in my own project?

The repository has no license, so all rights stay with achen2304. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pi-Pico-Keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards