Kicad projects
ACodingGirrafe·kicad-projects·projects/swing-pod/swing-pod.kicad_pcb
About the Kicad projects PCB
Kicad projects is an open source ESP32 PCB design by ACodingGirrafe, published on GitHub. It is a 2-layer board measuring 36 × 28 mm, with 9 components from 7 distinct parts.
Its main chip is the 113991114, from the ESP32 family. Other key parts include the SEN-21336. By type, the board carries 4 resistors, 2 ICs, 1 connector, 1 diode and 1 capacitor.
It belongs with the power & battery designs in this gallery.
From the project
kicad larp progress
An attempt to make PCB for a badminton swing-tracker pod for Jesus. A Seeed XIAO ESP32-S3 and a SparkFun Micro 6DoF IMU (LSM6DSV16X) sit on a 36 x 28 mm, 2-layer, 0.8 mm board. It charges through USB-C or through magnetic pogo pads. Made in KiCad 10.0.7.
- +Y is the board's top edge as drawn in KiCad, the edge with the USB-C connector. KiCad's own Y numbers get smaller toward it. - +X is to the right, looking at the top side. - The bottom silkscreen has a "+Y ^ USB-C" arrow. - The USB-C shell overhangs the +Y edge by about 0.5 mm, so it reaches toward the housing wall opening. - The board…
Main components on the Kicad projects
Kicad projects bill of materials (BOM)
9 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 113991114 XIAO ESP32-S3 Seeed Studio | XIAO-ESP32-S3-SMD | U1 |
| 1 | SEN-21336 SparkFun Micro 6DoF LSM6DSV16X SparkFun | SparkFun_Micro_6DoF_LSM6DSV16X_Flat | U2 |
| 1 | S2B-PH-K-S(LF)(SN) BATT JST-PH JST | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | 1N5819-T 1N5819 Diodes Inc. | D_DO-41_P10.16mm_Horizontal_SOD-123_Alt | D1 |
| 1 | CL10B104KB8NNNC 100n Samsung | C_0603_1608Metric | C1 |
| 2 | RC0603FR-07470KL 470k Yageo | R_0603_1608Metric | R1, R2 |
| 2 | RC0603FR-074K7L 4.7k Yageo | R_0603_1608Metric | R3, R4 |
Kicad projects design files
The KiCad project lives in the ACodingGirrafe/kicad-projects repository on GitHub; these links point at the commit this page was built from.
Kicad projects: common questions
What microcontroller does the Kicad projects use?
The Kicad projects is built around the 113991114, from the ESP32 family.
How big is the Kicad projects PCB?
The Kicad projects measures 36 × 28 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Kicad projects?
9 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kicad projects design files?
From the ACodingGirrafe/kicad-projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Kicad projects design in my own project?
The repository has no license, so all rights stay with ACodingGirrafe. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Kicad projects without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k