MRF-Pro v8
About the MRF-Pro v8 PCB
MRF-Pro v8 is an open source PCB design by acornelissen, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 56.5 × 28.7 mm, with 4 components from 4 distinct parts.
It belongs with the displays & leds, power & battery and sensors designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
MRF2 is version two of an open hardware / open firmware medium-format rangefinder camera for Mamiya Press / Universal Press lenses. It combines custom PCBs, ESP32-S3 firmware, LiDAR-based lens coupled focusing, dual OLED displays, and printed mechanical parts so you can build a f
MRF2 is version two of an open hardware / open firmware medium-format rangefinder camera for Mamiya Press / Universal Press lenses. It combines custom PCBs, ESP32-S3 firmware, LiDAR-based lens coupled focusing, dual OLED displays, and printed mechanical parts so you can build a fully featured medium-format shooter with configurable lens profiles and film formats.
MRF-Pro v8 bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Feather-1 | PinHeader_1x16_P2.54mm_Vertical | J1 |
| 1 | Feather-2 | PinHeader_1x12_P2.54mm_Vertical | J2 |
| 1 | FPC 8P Connector | TE_0-1734839-8_1x08-1MP_P0.5mm_Horizontal | J3 |
| 1 | Conn_01x08 | JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal | J4 |
MRF-Pro v8 design files
The KiCad project lives in the acornelissen/IDENTIDEM.design-MRF2 repository on GitHub; these links point at the commit this page was built from.
MRF-Pro v8: common questions
How big is the MRF-Pro v8 PCB?
The MRF-Pro v8 measures 56.5 × 28.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MRF-Pro v8?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the MRF-Pro v8 design files?
From the acornelissen/IDENTIDEM.design-MRF2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MRF-Pro v8 design in my own project?
Yes, under the terms of its GPL-3.0 license, which acornelissen chose for the repository.
More boards in IDENTIDEM.design-MRF2
Earlier revisions in the repo: MRF-Pro-v7.5
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k