MRF-Pro v8-breakout

acornelissen·IDENTIDEM.design-MRF2·PCBs/v2.0/Breakout/KiCAD/MRF-Pro-v8-breakout.kicad_pcb

MRF-Pro v8-breakout layout, top view — open source board by acornelissen

About the MRF-Pro v8-breakout

MRF-Pro v8-breakout is an open source PCB design by acornelissen, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 21 × 15.5 mm, with 11 components from 11 distinct parts.

Other key parts include the TLV75533. By type, the board carries 3 connectors, 3 capacitors, 1 IC, 1 inductor and 1 resistor.

It belongs with the dev boards & breakouts, displays & leds and power & battery designs in this gallery.

From the project

MRF2 is version two of an open hardware / open firmware medium-format rangefinder camera for Mamiya Press / Universal Press lenses. It combines custom PCBs, ESP32-S3 firmware, LiDAR-based lens coupled focusing, dual OLED displays, and printed mechanical parts so you can build a f

MRF2 is version two of an open hardware / open firmware medium-format rangefinder camera for Mamiya Press / Universal Press lenses. It combines custom PCBs, ESP32-S3 firmware, LiDAR-based lens coupled focusing, dual OLED displays, and printed mechanical parts so you can build a fully featured medium-format shooter with configurable lens profiles and film formats.

MRF-Pro v8-breakout, from the project README — From the project README

Main components on the MRF-Pro v8-breakout

MRF-Pro v8-breakout bill of materials (BOM)

11 components, 11 distinct parts.

Qty	Part	Footprint	Refs
1	TLV75533	SOT-23-5	U1
1	FPC 8P Connector	TE_0-1734839-8_1x08-1MP_P0.5mm_Horizontal	J5
1	Stemma QT	JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal	J6
1	TFS20L / DTS6012M	JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal	J7
1	1uF	C_0402_1005Metric	Cin1
1	10uF	C_0805_2012Metric	Cin2
1	0	L_0805_2012Metric	FB1
1	47uF	C_1206_3216Metric	C1
1	1uF	C_0603_1608Metric	C2
1	100nF	C_0402_1005Metric	C3
1	100k	R_0402_1005Metric	R1

MRF-Pro v8-breakout design files

The KiCad project lives in the acornelissen/IDENTIDEM.design-MRF2 repository on GitHub; these links point at the commit this page was built from.

MRF-Pro v8-breakout: common questions

How big is the MRF-Pro v8-breakout?

The MRF-Pro v8-breakout measures 21 × 15.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MRF-Pro v8-breakout?

11 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the MRF-Pro v8-breakout design files?

From the acornelissen/IDENTIDEM.design-MRF2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MRF-Pro v8-breakout design in my own project?

Yes, under the terms of its GPL-3.0 license, which acornelissen chose for the repository.

More boards in IDENTIDEM.design-MRF2

Similar boards