ACwing Flow A

ACwing-UAV·ACwing_HW·04 - FLOW_KiCadProj/ACwing_Flow_A.kicad_pcb

ACwing Flow A PCB layout, top view — open source STM32 board by ACwing-UAV

About the ACwing Flow A PCB

ACwing Flow A is an open source STM32 PCB design by ACwing-UAV, published on GitHub. It is a 2-layer board measuring 21 × 25 mm, with 30 components from 24 distinct parts.

Its main chip is the STM32WB55CGU6, from the STM32 family. Other key parts include the LSM6DSV16XTR, IIS2MDCTR and LPS22HHTR. By type, the board carries 14 capacitors, 9 resistors, 4 ICs, 2 connectors and 1 diode.

It belongs with the robotics & motion and rf & radio designs in this gallery.

From the project

ACwing is a modular set of PCBs for small multirotors.

Project: ACwing · Author: Andrea Cirillo

KiCad 7 sources of the ACwing Flow rev A board (they also open in KiCad 8/9). The board description, schematic PDF, BoM, JLCPCB files, Gerber, STEP and board views are in 00 - Docs/03 - FLOWDocs`.

Main components on the ACwing Flow A

ACwing Flow A bill of materials (BOM)

30 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LSM6DSV16XTR
PMW3901MB-TXQT
STMicroelectronics
U1
1
STM32WB55CGU6
LDK130PU-R
STMicroelectronics
U2
1
IIS2MDCTR
VL53L1CXV0FY/1
STMicroelectronics
U3
1
LPS22HHTR
STM32C011F4U6
STMicroelectronics
U4
1
TYPE-C-31-M-12
Qwiic
HRO (Korea Hroparts)
J1
1
Qwiic
JST
J2
1
XL-2020RGBC-WS2812B
green
XINGLIGHT
D1
1
CL05B104KO5NNNC
22uF
Samsung Electro-Mechanics
C1
1
1206B475K500NT
22uF
FH (Guangdong Fenghua)
C2
3
100nF
C3, C5, C10
1
10uF
C4
1
CL31A107MQHNNNE
4.7uF
Samsung Electro-Mechanics
C6
1
CL10A475KO8NNNC
100nF
Samsung Electro-Mechanics
C7
1
CL05A105KA5NQNC
1uF
Samsung Electro-Mechanics
C8
1
CL10A475KO8NNNC
1uF
Samsung Electro-Mechanics
C9
2
4.7uF
C11, C13
2
CL05B104KO5NNNC
100nF
Samsung Electro-Mechanics
C12, C14
1
3R
R1
3
0402WGF1003TCE
10k
UNI-ROYAL
R2, R4, R10
1
RC-02K2873FT
10k
FH (Guangdong Fenghua)
R3
Show 4 more
QtyPartRefs
1
15k 1%
R5
1
10k 1%
R6
1
0402WGF1002TCE
10k
UNI-ROYAL
R9
1
0402WGF1003TCE
1k
UNI-ROYAL
R11

ACwing Flow A design files

The KiCad project lives in the ACwing-UAV/ACwing_HW repository on GitHub; these links point at the commit this page was built from.

ACwing Flow A: common questions

What microcontroller does the ACwing Flow A use?

The ACwing Flow A is built around the STM32WB55CGU6, from the STM32 family.

How big is the ACwing Flow A PCB?

The ACwing Flow A measures 21 × 25 mm, has 2 copper layers and is 1 mm thick.

How many components are on the ACwing Flow A?

30 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ACwing Flow A design files?

From the ACwing-UAV/ACwing_HW repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ACwing Flow A design in my own project?

The repository has no license, so all rights stay with ACwing-UAV. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ACwing Flow A without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in ACwing_HW

Similar boards