25 open source boards using the IIS2MDCTR

Real designs built with the IIS2MDCTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

25 boardsClear filters|Most starred

How designs wire the IIS2MDCTR

Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the IIS2MDCTR connects to, and the resistors, capacitors and other passives placed on it.

  • The C1_5 pin has a capacitor to GND on 17 of 18 designs, most often 220 nF (then 100 nF).
  • The VDD_9 pin has a decoupling capacitor on 17 of 18 designs, most often 100 nF (then 10 µF).
  • The VDD_IO pin has a decoupling capacitor on 17 of 18 designs, most often 100 nF (then 10 µF).
  • The SCL/SPC pin has a pull-up to 3.3V on 14 of 18 designs, most often 4.7 kΩ (then 2.2 kΩ).
SCL/SPCpin 1Connected to: The microcontroller 50%
  • Pull-up to 3.3V on 78% · 4.7 kΩ (9), 2.2 kΩ (4), 10 kΩ (1)
NC_2pin 2Connected to: Not connected 89%
CS_3pin 3Connected to: 3.3V 78%
SDA/SDI/SDOpin 4Connected to: The microcontroller 50%
  • Pull-up to 3.3V on 78% · 4.7 kΩ (9), 2.2 kΩ (4), 10 kΩ (1)
C1_5pin 5Connected to: Signal 100%
  • Capacitor to GND on 94% · 220 nF (15), 100 nF (1)
GND_6pin 6Connected to: GND 94%
GND_8pin 8Connected to: GND 100%
VDD_9pin 9Connected to: 3.3V 89%
  • Decoupling capacitor on 94% · 100 nF (36), 10 µF (8), 2.2 µF (3)
VDD_IOpin 10Connected to: 3.3V 89%
  • Decoupling capacitor on 94% · 100 nF (38), 10 µF (11), 2.2 µF (3)
NC_11pin 11Connected to: Not connected 89%
NC_12pin 12Connected to: Not connected 89%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Moto gps rev a1 by mx3353672833-debug, Module by Szybet, LoRa-STM32WL-DevKit by OLIMEX and OpenJetECU by yuchao86.

The IIS2MDCTR in open source designs

The gallery holds 25 open source boards using the IIS2MDCTR from 19 GitHub repositories; a typical one measures about 40.8 × 40.8 mm and carries around 81 components.

63% use four copper layers or more, and 24% carry an open source license.

The most starred is Moto gps rev a1 by mx3353672833-debug.

Microcontrollers on boards using the IIS2MDCTR

IIS2MDCTR: common questions

Where can I find a IIS2MDCTR reference design?

Each of the 25 boards on this page is a real design using the IIS2MDCTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the IIS2MDCTR C1_5 pin connected?

The C1_5 pin has a capacitor to GND on 17 of 18 designs, most often 220 nF (then 100 nF). Counted from the KiCad layouts of 18 open source designs using the IIS2MDCTR.

What decoupling capacitors do designs use on the IIS2MDCTR VDD_9 pin?

The VDD_9 pin has a decoupling capacitor on 17 of 18 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 18 open source designs using the IIS2MDCTR.

What decoupling capacitors do designs use on the IIS2MDCTR VDD_IO pin?

The VDD_IO pin has a decoupling capacitor on 17 of 18 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 18 open source designs using the IIS2MDCTR.

What parts are used alongside the IIS2MDCTR?

The USBLC6-2SC6, W25N01GVZEIG_TR, 24CW1280T-I/OT, BMI088 and INA219AIDCNR appear in the most repositories here.

Which microcontrollers do boards using the IIS2MDCTR use?

Most are built on STM32 (14), ESP32 (3) and RP2040/RP2350 (2).

How big is a typical board using the IIS2MDCTR?

The median is 40.8 × 40.8 mm, and 38% are two-layer designs.

What is the most popular open source board using the IIS2MDCTR?

By GitHub stars, Moto gps rev a1 by mx3353672833-debug, with 320 stars.

Can I simulate one of these boards using the IIS2MDCTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part