Cw fe310-target
adamws·cw-fe310-target
About the Cw fe310-target PCB
Cw fe310-target is an open source RISC-V PCB design by adamws, published on GitHub. It is a 2-layer board measuring 56 × 67 mm, with 20 components from 10 distinct parts.
Its main chip is the FE310-G000, from the RISC-V family. Other key parts include the IS25LP128 and SN74LVC1G07DBVR. By type, the board carries 11 capacitors, 4 ICs, 4 resistors and 1 connector.
From the project
FE310 RISC-V target board for chipwhisperer
Main components on the Cw fe310-target
Cw fe310-target bill of materials (BOM)
20 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IS25LP128 | SOIJ-8_5.3x5.3mm_P1.27mm | U1 |
| 2 | SN74LVC1G07DBVR | SOT-753 | U2, U3 |
| 1 | FE310-G000 | QFN-48-1EP_6x6mm_P0.4mm_EP4.66x4.66mm_ThermalVias | U4 |
| 1 | SerialSel | PinHeader_2x02_P2.54mm_Vertical | J2 |
| 9 | 0.1uF | C_0603_1608Metric | C1, C4, C5, C8, C9, C10, C11, C12 +1 |
| 1 | 100n | C_0603_1608Metric | C6 |
| 1 | 10nF | C_0603_1608Metric | C7 |
| 1 | 51R | R_0603_1608Metric | R1 |
| 2 | 100K | R_0603_1608Metric | R2, R3 |
| 1 | 100 | R_0603_1608Metric | R4 |
Cw fe310-target design files
The KiCad project lives in the adamws/cw-fe310-target repository on GitHub; these links point at the commit this page was built from.
- Layoutcw308_fe310.kicad_pcb
Cw fe310-target: common questions
What microcontroller does the Cw fe310-target use?
The Cw fe310-target is built around the FE310-G000, from the RISC-V family.
How big is the Cw fe310-target PCB?
The Cw fe310-target measures 56 × 67 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cw fe310-target?
20 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cw fe310-target design files?
From the adamws/cw-fe310-target repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Cw fe310-target design in my own project?
The repository has no license, so all rights stay with adamws. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Cw fe310-target without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105