19 open source boards using the SN74LVC1G07DBVR
Real designs built with the SN74LVC1G07DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32P4C5 Board
phancak
100 × 50 mm174 parts4LMIT6ESP32
Po midi adapter
Hanz-Tech
75.3 × 71 mm51 parts2LNo license5PIC
YukaLink
Misaka0x2730
94.3 × 81.8 mm235 parts4LGPL-3.03ESP32
SF 01 Compute Board
sandgum
128 × 128 mm332 parts4LNo license2STM32
LoRa-Board
phancak
100 × 54 mm116 parts4LMIT2STM32
STM32H7 Board
phancak
100 × 50 mm102 parts4LMIT2FPGA
SN-64
FantomZap
101.8 × 80.5 mm383 parts6LNo license1RP2040/RP2350
StratosCore
pantojinho
60 × 84 mm245 parts4LNo license1RISC-V
VVDAP
ai03-2725
30 × 41.5 mm53 parts2LGPL-3.01ESP32
VERA MODULE A2
gianlucarenzi
177.8 × 77.3 mm181 parts2LGPL-3.00A1-4RD
mkol-ME
120 × 94 mm93 parts4LMIT0ESP32
ESP32C6 Board
phancak
100 × 50 mm71 parts4LMIT0RISC-V
Cw fe310-target
adamws
56 × 67 mm20 parts2LNo license0- schematic only · 1352 partsSTM32
Mira
max-talanov
1352 parts2LMIT0 Canjay
atopile
122 × 100 mm152 parts6LMIT29Hil core
atopile
1.5 × 9.6 mm114 parts4LMIT29ESP32
Bottom
Hanz-Tech
75.3 × 71.1 mm21 parts2LNo license5Project ATO / Power
pratham-cloud-ctrl
175 × 185 mm156 parts4LCustom license0Default
glovepost
45 × 167 mm137 parts4LMIT1
How designs wire the SN74LVC1G07DBVR
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the SN74LVC1G07DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 10 of 16 designs, most often 100 nF (then 1 µF).
- The Y pin has a series resistor on 8 of 16 designs, most often 2 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1 | Connected to: Not connected 100% | — |
| GNDpin 3 | Connected to: GND 94% | — |
| Ypin 4 | Connected to: A connector 38%, the microcontroller 38% |
|
| VCCpin 5 | Connected to: 3.3V 63% · a signal 38% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Canjay by atopile, ESP32P4C5 Board by phancak, Bottom by Hanz-Tech and YukaLink by Misaka0x2730.
The SN74LVC1G07DBVR in open source designs
The gallery holds 19 open source boards using the SN74LVC1G07DBVR from 17 GitHub repositories; a typical one measures about 100 × 74.2 mm and carries around 137 components.
68% use four copper layers or more, and 63% carry an open source license.
The most starred is Canjay by atopile.
Parts used alongside the SN74LVC1G07DBVR
Microcontrollers on boards using the SN74LVC1G07DBVR
What boards using the SN74LVC1G07DBVR are built for
SN74LVC1G07DBVR: common questions
Where can I find a SN74LVC1G07DBVR reference design?
Each of the 19 boards on this page is a real design using the SN74LVC1G07DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC1G07DBVR VCC pin?
The VCC pin has a decoupling capacitor on 10 of 16 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 16 open source designs using the SN74LVC1G07DBVR.
What resistor goes on the SN74LVC1G07DBVR Y pin?
The Y pin has a series resistor on 8 of 16 designs, most often 2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 16 open source designs using the SN74LVC1G07DBVR.
What parts are used alongside the SN74LVC1G07DBVR?
The USBLC6-2SC6, SN74LVC1G08DBVR, W25Q128JVSIQ, SMTSO2515CTJ and SN74LVC1G11DBVR appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC1G07DBVR use?
Most are built on ESP32 (6), STM32 (3), RISC-V (2) and FPGA (1).
How big is a typical board using the SN74LVC1G07DBVR?
The median is 100 × 74.2 mm, and 32% are two-layer designs.
What is the most popular open source board using the SN74LVC1G07DBVR?
By GitHub stars, Canjay by atopile, with 29 stars.
Can I simulate one of these boards using the SN74LVC1G07DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.