HardLabs

Aditya s-Keyboard

adirock09·Aditya-s-Keyboard·KEYBOARD/PCB/KeyBoard.kicad_pcb

Aditya s-Keyboard PCB layout, top view — open source RP2040/RP2350 board by adirock09

About the Aditya s-Keyboard PCB

Aditya s-Keyboard is an open source RP2040/RP2350 PCB design by adirock09, published on GitHub. It is a 2-layer board measuring 321 × 101 mm, with 130 components from 17 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 68 switches, 61 diodes and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

- Base on Raspberry pico - Has 61 keys ( 60% Keyboard Matrix) - Has 2 Rotor Encoder

- Base on Raspberry pico - Has 61 keys ( 60% Keyboard Matrix) - Has 2 Rotor Encoder

Estimated Total Hardware Cost: USD 98.31

Aditya s-Keyboard, from the project README
From the project README

Main components on the Aditya s-Keyboard

RaspberryPi_Pico

Aditya s-Keyboard bill of materials (BOM)

130 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
1
MX_stab
S1
2
MX_stab
S2, S3
1
MX_stab
S4
1
MX_stab
S5
46
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +38
1
SW_Push
SW14
1
SW_Push
SW15
1
SW_Push
SW28
1
SW_Push
SW29
2
SW_Push
SW41, SW50
6
SW_Push
SW42, SW43, SW44, SW46, SW48, SW49
1
SW_Push
SW45
1
SW_Push
SW47
1
SW_Push
SW61
2
RotaryEncoder_Switch_MP
SW62, SW63
61
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +53

Aditya s-Keyboard design files

The KiCad project lives in the adirock09/Aditya-s-Keyboard repository on GitHub; these links point at the commit this page was built from.

Aditya s-Keyboard: common questions

What microcontroller does the Aditya s-Keyboard use?

The Aditya s-Keyboard is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Aditya s-Keyboard PCB?

The Aditya s-Keyboard measures 321 × 101 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Aditya s-Keyboard?

130 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Aditya s-Keyboard design files?

From the adirock09/Aditya-s-Keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Aditya s-Keyboard design in my own project?

The repository has no license, so all rights stay with adirock09. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Aditya s-Keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards