Voicevault reva
adlererik·voicevault·hardware/rev-a/voicevault-reva.kicad_pcb
About the Voicevault reva PCB
Voicevault reva is an open source Nordic nRF PCB design by adlererik, published on GitHub. It is a 2-layer board measuring 150 × 120 mm, with 26 components from 26 distinct parts.
Its main chip is the TSW-106-07-G-S, from the Nordic nRF family. By type, the board carries 16 connectors, 5 capacitors, 4 resistors and 1 switch.
It belongs with the iot & wireless designs in this gallery.
From the project
VoiceVault: a dedicated secure voice endpoint with an adversarial Rust lab and a Safe 7 core-based standalone PCB design under review.
The owner has approved a simpler Rev C direction: a replaceable BL-5C-style lithium-ion pack with wired charging, one NXP SE050E2 secure element, a larger QFN BLE package, and in-person verification on both devices, with Qi and NFC removed. This supersedes the earlier AAA/NiMH proposal. Rev C now has a separate native KiCad circuit draft and a completely unplaced, unrouted PCB inventory: 196 electrical components, 100 fewer than B0. Initial native circuit checks and scoped ngspice experiments are recorded; full power, RF and hardware qualification remain open. Placement and routing are…
Voicevault reva bill of materials (BOM)
26 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TSW-120-07-G-D DK2 CN1 extension Samtec | PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | TSW-110-07-G-S DK2 CN4 digital Samtec | PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | TSW-108-07-G-S DK2 CN6 digital Samtec | PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | TSW-106-07-G-S DK2 CN7 analog Samtec | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | TSW-108-07-G-S DK2 CN5 power Samtec | PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | TSW-112-07-G-S WM8960 digital harness Samtec | PinHeader_1x12_P2.54mm_Vertical | J6 |
| 1 | TSW-106-07-G-S nRF52840 radio harness Samtec | PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | TSW-107-07-G-S TROPIC Click harness Samtec | PinHeader_1x07_P2.54mm_Vertical | J8 |
| 1 | TSW-104-07-G-S OPTIGA Trust M harness Samtec | PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | TSW-106-07-G-S microSD SPI harness Samtec | PinHeader_1x06_P2.54mm_Vertical | J10 |
| 1 | TSW-106-07-G-S Codec analog harness Samtec | PinHeader_1x06_P2.54mm_Vertical | J11 |
| 1 | TSW-104-07-G-S CTIA headset harness Samtec | PinHeader_1x04_P2.54mm_Vertical | J12 |
| 1 | TSW-102-07-G-S Qi receiver output Samtec | PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | TSW-104-07-G-S BQ24074 charger harness Samtec | PinHeader_1x04_P2.54mm_Vertical | J14 |
| 1 | TSW-104-07-G-S 5V regulator harness Samtec | PinHeader_1x04_P2.54mm_Vertical | J15 |
| 1 | TSW-102-07-G-S Local update button Samtec | PinHeader_1x02_P2.54mm_Vertical | J16 |
| 1 | JS202011CQN Physical mic disconnect C&K | SW_CK_JS202011CQN_DPDT_Straight | SW1 |
| 1 | GRM188R71C104KA01D 100n 16V Murata | C_0603_1608Metric | C1 |
| 1 | GRM21BR61C106KE15L 10u 16V Murata | C_0805_2012Metric | C2 |
| 1 | C1210C226K4PACTU 22u 16V KEMET | C_1210_3225Metric | C3 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | UKL1A221KDD 220u 10V HP left Nichicon | CP_Radial_D6.3mm_P2.50mm | C4 |
| 1 | UKL1A221KDD 220u 10V HP right Nichicon | CP_Radial_D6.3mm_P2.50mm | C5 |
| 1 | RC0603FR-072K2L 2.2k mic bias Yageo | R_0603_1608Metric | R1 |
| 1 | RC0603FR-0710KL 10k mute sense Yageo | R_0603_1608Metric | R2 |
| 1 | RC0603FR-0747KL 47k SD deselect Yageo | R_0603_1608Metric | R3 |
| 1 | RC0603FR-0710KL 10k SE deselect Yageo | R_0603_1608Metric | R4 |
Voicevault reva design files
The KiCad project lives in the adlererik/voicevault repository on GitHub; these links point at the commit this page was built from.
Voicevault reva: common questions
What microcontroller does the Voicevault reva use?
The Voicevault reva is built around the TSW-106-07-G-S, from the Nordic nRF family.
How big is the Voicevault reva PCB?
The Voicevault reva measures 150 × 120 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Voicevault reva?
26 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Voicevault reva design files?
From the adlererik/voicevault repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Voicevault reva design in my own project?
The repository has no license, so all rights stay with adlererik. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Voicevault reva without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
More boards in voicevault
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381