Pixl.js
solosky·pixl.js·hw/RevA/pixl.js/pixl.js.kicad_pcb
About the Pixl.js PCB
Pixl.js is an open source Nordic nRF PCB design by solosky, published on GitHub under the GPL-2.0 license. It is a 4-layer board measuring 40 × 23 mm, with 45 components from 30 distinct parts.
Its main chip is the nRF52832-QFxx, from the Nordic nRF family. Other key parts include the SHT20, GD25Q16C and MSW. By type, the board carries 21 capacitors, 8 resistors, 4 ICs, 3 inductors, 2 crystals and 2 connectors.
From the project
An emulator for Amiibo!
中文文档 English Documentation * Italian Documentation
FlipperZero Firmware mlib TLSF cwalk SPIFFS ChameleonUltra * CH32V003-GameConsole
特别感谢 @Caleeeeeeeeeeeee 完善的Bootloader。 特别感谢 @白橙 制作的外壳。 * 特别感谢 @impeeza 提供的文档翻译 。
Where do you find the community? * Pixl.js community discord server
本项目为开源项目,仅为学习研究用途,请勿用于商业用途。 Amiibo是任天堂的注册商标,NTAG21X为NXP的注册商标。
如果对项目做了修改,需要把改后的源码发布出来 发布出来的源码必须要使用相同的License发布

Main components on the Pixl.js
Pixl.js bill of materials (BOM)
45 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | nRF52832-QFxx | QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mm | U1 |
| 1 | SHT20 | DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm | U2 |
| 1 | GD25Q16C | USON-8_3x2mm_0.5pich | U3 |
| 1 | MSW | MSW | U4 |
| 1 | AO3400A | SOT-23 | Q1 |
| 1 | 32.768K | Crystal_SMD_2012-2Pin_2.0x1.2mm | Y1 |
| 1 | 32MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 1 | Conn_01x12 | FPC_12 0.8mm | J1 |
| 1 | Conn_01x04 | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J2 |
| 1 | Antenna | AN2051 | AE1 |
| 1 | Antenna_Loop | 40x22MM_NFC_ANTENA | AE2 |
| 1 | Battery_Cell | BAT-SMD_CR2032-3V | BT1 |
| 1 | LED_Small | LED_0402_1005Metric | D1 |
| 1 | 15nH | L_0402_1005Metric | L1 |
| 1 | 10uH | L_0603_1608Metric | L2 |
| 1 | TBD | L_0402_1005Metric | L3 |
| 1 | 1uF | C_0402_1005Metric | C1 |
| 8 | 0.1uF | C_0402_1005Metric | C2, C3, C5, C6, C7, C10, C14, C16 |
| 1 | 4.7uF | C_0402_1005Metric | C4 |
| 4 | 12pF | C_0402_1005Metric | C8, C11, C23, C26 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10uF | C_0402_1005Metric | C9 |
| 1 | 1uF/25V | C_0402_1005Metric | C12 |
| 1 | 1uF/16V | C_0402_1005Metric | C13 |
| 2 | 150pF | C_0402_1005Metric | C15, C20 |
| 2 | TBD | C_0402_1005Metric | C17, C18 |
| 2 | 100K | R_0402_1005Metric | R1, R2 |
| 2 | 10K | R_0402_1005Metric | R3, R5 |
| 1 | 0 | R_0402_1005Metric | R4 |
| 1 | 10 | R_0402_1005Metric | R6 |
| 2 | 4.7K | R_0402_1005Metric | R7, R8 |
Pixl.js design files
The KiCad project lives in the solosky/pixl.js repository on GitHub; these links point at the commit this page was built from.
Pixl.js: common questions
What microcontroller does the Pixl.js use?
The Pixl.js is built around the nRF52832-QFxx, from the Nordic nRF family.
How big is the Pixl.js PCB?
The Pixl.js measures 40 × 23 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Pixl.js?
45 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pixl.js design files?
From the solosky/pixl.js repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pixl.js design in my own project?
Yes, under the terms of its GPL-2.0 license, which solosky chose for the repository.
Can I test firmware for the Pixl.js without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Mikoto
zhiayang
18 × 33.3 mm53 parts4LApache-2.0358