USB-Cable-Checker
adpys24-code·USB-Cable-Checker
About the USB-Cable-Checker PCB
USB-Cable-Checker is an open source PCB design by adpys24-code, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 85 × 70 mm, with 68 components from 17 distinct parts.
Other key parts include the AMS1117-3.3. By type, the board carries 27 diodes, 26 resistors, 10 connectors, 2 capacitors, 1 IC and 1 battery holder.
It belongs with the power & battery designs in this gallery.
From the project
A passive continuity tester for USB cables, designed in KiCad.
A passive continuity tester for USB cables, designed in KiCad 10.
Plug one end of a cable into a source connector and the other end into a sink connector. Each conductor present in the cable lights its own LED, so you can see at a glance whether a cable is charge-only, USB 2.0, or fully wired for USB 3.x, and spot broken or missing wires.
Front view of PCB is in docs/board-top.png.

Main components on the USB-Cable-Checker
USB-Cable-Checker bill of materials (BOM)
68 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | C129018 USB-C 3.x (source) | USB-C-SMD_TYPE-C-USB-20 | J1 |
| 1 | C168724 USB-A 2.0 (source) | USB-A-TH_C168724 | J2 |
| 1 | C7501876 USB-A 3.0 (source) | USB-SMD_HC-USB3.0-L142-P | J3 |
| 1 | C129018 USB-C 3.x (sink) | USB-C-SMD_TYPE-C-USB-20 | J4 |
| 1 | C7501849 USB-B 3.0 (sink) | USB-B-TH_9P-L18.5-W12.0 | J5 |
| 1 | C598201 USB Micro-B 3.0 (sink) | USB-SMD_ZX360D-B-10P-30 | J6 |
| 1 | C53207143 USB Mini-B (sink) | MINI-USB-SMD_U144-1245-161038 | J7 |
| 1 | C2858295 Lightning (sink) | USB-SMD-LIGHTNING_USB-PG | J8 |
| 1 | C2765188 USB Micro-B 2.0 (sink) | MICRO-USB-SMD_MICRO-5.9ZB5.7-040 | J9 |
| 1 | C295747 VIN 3-12V | CONN-SMD_P2.00_S2B-PH-SM4-TB-LF-SN | J10 |
| 1 | CR2032 | BAT-TH_CR2032-BS-6-1 | BT1 |
| 1 | C2906280 Vin / CR2032 | SW-SMD_MST22D18G2 | SW1 |
| 1 | SS14 | D_SMA | D1 |
| 26 | C965800 Orange | LED_0603_1608Metric_NoSilk | D101, D102, D103, D104, D105, D106, D107, D108 +18 |
| 2 | C15850 10uF 25V | C_0805_2012Metric | C1, C2 |
| 26 | 1k | R_0603_1608Metric | R101, R102, R103, R104, R105, R106, R107, R108 +18 |
USB-Cable-Checker design files
The KiCad project lives in the adpys24-code/USB-Cable-Checker repository on GitHub; these links point at the commit this page was built from.
- Layoutusb-cable-checker.kicad_pcb
- Schematicusb-cable-checker.kicad_sch
- BOMproduction/bom.csv
USB-Cable-Checker: common questions
How big is the USB-Cable-Checker PCB?
The USB-Cable-Checker measures 85 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB-Cable-Checker?
68 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB-Cable-Checker design files?
From the adpys24-code/USB-Cable-Checker repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the USB-Cable-Checker design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which adpys24-code chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k