Placa dezvolatre pic
About the Placa dezvolatre pic PCB
Placa dezvolatre pic is an open source PIC PCB design by Adrian-71, published on GitHub under the MIT license. It is a 2-layer board measuring 62.1 × 72.1 mm, with 36 components from 24 distinct parts.
Its main chip is the PIC18F67K40, from the PIC family. Other key parts include the AMS1117-5.0, AMS1117-3.3 and HT42B534_8SOP. By type, the board carries 11 capacitors, 8 resistors, 6 connectors, 4 ICs, 2 switches and 2 diodes.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
18f67k40 development board
Main components on the Placa dezvolatre pic
Placa dezvolatre pic bill of materials (BOM)
36 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC18F67K40 | TQFP-64_10x10mm_P0.5mm | U1 |
| 1 | AMS1117-5.0 | SOT-223-3_TabPin2 | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | HT42B534_8SOP | SOP-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | Crystal | Crystal_AT310_D3.0mm_L10.0mm_Horizontal | Y1 |
| 1 | DC_In | BarrelJack_CLIFF_FC681465S_SMT_Horizontal | J1 |
| 2 | Conn_02x15 | PinHeader_2x15_P2.54mm_Vertical | J2, J3 |
| 1 | ICSP | RJ25_Wayconn_MJEA-660X1_Horizontal | J4 |
| 1 | Power | PinHeader_2x04_P2.54mm_Vertical | J5 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J6 |
| 1 | Jumper_2_Open | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | 3.3V1 |
| 1 | Jumper_2_Bridged | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | 5V1 |
| 1 | RST | SW_SPST_B3U-1000P | SW1 |
| 1 | User | SW_SPST_B3U-1000P | SW2 |
| 1 | POW | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | USR_LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 4 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C5, C13 |
| 4 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C6, C12 |
| 2 | 15pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 1 | C_Small | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3 |
| 2 | 200 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4 |
| 2 | 5K1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 2 | 33 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
Placa dezvolatre pic design files
The KiCad project lives in the Adrian-71/Placa-dezvolatre-pic repository on GitHub; these links point at the commit this page was built from.
Placa dezvolatre pic: common questions
What microcontroller does the Placa dezvolatre pic use?
The Placa dezvolatre pic is built around the PIC18F67K40, from the PIC family.
How big is the Placa dezvolatre pic PCB?
The Placa dezvolatre pic measures 62.1 × 72.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Placa dezvolatre pic?
36 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Placa dezvolatre pic design files?
From the Adrian-71/Placa-dezvolatre-pic repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Placa dezvolatre pic design in my own project?
Yes, under the terms of its MIT license, which Adrian-71 chose for the repository.
Can I test firmware for the Placa dezvolatre pic without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PICPslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7k
PICMicro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414
PICGB-BENCH-G1
Gekkio
100 × 100 mm98 parts4LCC-BY-4.0376
PICGB-CARTPP-DIY
100 × 100 mm22 parts2LCC-BY-4.0376
PICGB-MBCTEST
51.4 × 61 mm32 parts2LCC-BY-4.0376
PICGB-LIVE32
51.4 × 61 mm46 parts4LCC-BY-4.0376