HardLabs

Noir keyboard pro

advaitconty·noir-keyboard-pro·KiCAD/magic-keys.kicad_pcb

Noir keyboard pro PCB layout, top view — open source RP2040/RP2350 board by advaitconty

About the Noir keyboard pro PCB

Noir keyboard pro is an open source RP2040/RP2350 PCB design by advaitconty, published on GitHub. It is a 2-layer board measuring 293 × 160.5 mm, with 99 components from 5 distinct parts.

Its main chip is the Raspberry_Pi_Pico, from the RP2040/RP2350 family. By type, the board carries 24 fuses, 1 IC and 1 connector.

It belongs with the keyboards designs in this gallery.

From the project

A Mechanical Magic Keyboard-esque Keyboard for the iPad Pro 11inch (M1/M2)

Noir keyboard pro, from the project README
From the project README

Main components on the Noir keyboard pro

Raspberry_Pi_Pico

Noir keyboard pro bill of materials (BOM)

99 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Raspberry_Pi_Pico
U1
1
OLED_128X32
OLED_128x32
J2
73
Diode
0)Diode1, 1!Diode1, 2@Diode1, 3#Diode1, 4$Diode1, 5%Diode1, 6^Diode1, 7&Diode1 +65
12
Keyswitch
F1, F2, F3, F4, F5, F6, F7, F8 +4
12
Diode
F1Diode1, F2Diode1, F3Diode1, F4Diode1, F5Diode1, F6Diode1, F7Diode1, F8Diode1 +4

Noir keyboard pro design files

The KiCad project lives in the advaitconty/noir-keyboard-pro repository on GitHub; these links point at the commit this page was built from.

Noir keyboard pro: common questions

What microcontroller does the Noir keyboard pro use?

The Noir keyboard pro is built around the Raspberry_Pi_Pico, from the RP2040/RP2350 family.

How big is the Noir keyboard pro PCB?

The Noir keyboard pro measures 293 × 160.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Noir keyboard pro?

99 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Noir keyboard pro design files?

From the advaitconty/noir-keyboard-pro repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Noir keyboard pro design in my own project?

The repository has no license, so all rights stay with advaitconty. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Noir keyboard pro without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards