Cemicro part1
AebrahmRamos·M68HC11-EPROM-Programmer·KiCad-Project/read-schema/cemicro-part1.kicad_pcb
About the Cemicro part1 PCB
Cemicro part1 is an open source PCB design by AebrahmRamos, published on GitHub. It is a 2-layer board measuring 25.3 × 23.8 mm, with 9 components from 3 distinct parts.
Other key parts include the 2764. By type, the board carries 8 resistors and 1 IC.
It belongs with the usb & debug tools and displays & leds designs in this gallery.
From the project
This project implements an EPROM reader using the M68HC11 microcontroller and a 2764 EPROM chip. The system reads the first 25 bytes of data stored in the EPROM and transmits it to a host computer via serial communication for display in both hexadecimal and ASCII formats.
This project implements an EPROM reader using the M68HC11 microcontroller and a 2764 EPROM chip. The system reads the first 25 bytes of data stored in the EPROM and transmits it to a host computer via serial communication for display in both hexadecimal and ASCII formats.
The hardware setup maps the M68HC11 ports to the 2764 EPROM pins as follows:
- Port B (PB0-PB7): Connected to EPROM address inputs A0-A7 - Port C (PC0-PC7): Connected to EPROM data outputs Q0-Q7 - Port A (PA5, PA6): Control signals for Chip Enable (CE) and Output Enable (OE) - Upper Address Lines (A8-A12): Grounded to…
Main components on the Cemicro part1
Cemicro part1 bill of materials (BOM)
9 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2764 | DIP-28_W15.24mm | U2 |
| 1 | 10k | R_LDR_4.9x4.2mm_P2.54mm_Vertical | R1 |
| 7 | 1k | R_LDR_4.9x4.2mm_P2.54mm_Vertical | R2, R3, R4, R5, R6, R7, R8 |
Cemicro part1 design files
The KiCad project lives in the AebrahmRamos/M68HC11-EPROM-Programmer repository on GitHub; these links point at the commit this page was built from.
Cemicro part1: common questions
How big is the Cemicro part1 PCB?
The Cemicro part1 measures 25.3 × 23.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cemicro part1?
9 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cemicro part1 design files?
From the AebrahmRamos/M68HC11-EPROM-Programmer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Cemicro part1 design in my own project?
The repository has no license, so all rights stay with AebrahmRamos. Use it as a reference, and ask the author before reusing the design.
More boards in M68HC11-EPROM-Programmer
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k