27 open source boards using the 2764
Real designs built with the 2764, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Vic2020mainboard
danwerner21
357.8 × 124.5 mm127 parts2LNo license78AVR/Arduino
PC-8001 SD
yanataka60
100 × 100 mm19 parts2LMIT28AVR/Arduino
MZ80K SD
yanataka60
100 × 100 mm21 parts2LMIT27- schematic only · 32 parts
Digicard-D-Net
markadev
32 parts2LNo license23 Microdigital - TK 2000
clemarfolly
236.8 × 169.8 mm195 parts2LNo license17AVR/Arduino
PC-6001 SD
yanataka60
79 × 127 mm17 parts2LMIT7Z80 Micro
AidanHockey5
85.1 × 111.8 mm34 parts2LNo license6AVR/Arduino
MZ-700 SD
yanataka60
100 × 100 mm21 parts2LMIT6- schematic only · 207 parts
DeskPro386 16
breadboardinglabs
207 partsMIT4 Chameleon schematics
Seequa-Computer-Preservation
435 × 317.5 mm361 parts2LNo license3- schematic only · 278 parts
ARCADE
antongale
278 parts2LNo license3 FellaPC
agkaminski
284.9 × 96.5 mm107 parts2LCC0-1.02Lomax ColorMagic Redux
RichCini
254 × 137.7 mm148 parts4LNo license1EPROM Card
codesqueak
203.2 × 203.2 mm77 parts2LCERN-OHL-S-2.01Zak180
agkaminski
188 × 128.3 mm128 parts4LCC-BY-NC-4.00Super Luxus CMOS RAM Platine
Kayto
137 × 135.5 mm32 parts2LNo license0No.slot.clock neo
patdie421
26.7 × 85.3 mm6 parts2LNo license0Plusd no route
alvaroalea
106.7 × 83.8 mm47 parts2LNo license24Alphatronic PC8 ROM-PACK
felge1966
90 × 44 mm5 parts2LGPL-3.03AVR/Arduino
Vga
agkaminski
129.5 × 74.2 mm36 parts2LNo license1Cemicro part1
AebrahmRamos
25.3 × 23.8 mm9 parts2LNo license1C64RAMCartTOP
Kayto
134.4 × 120 mm25 parts2LNo license0Situacion1
alvaroalea
188 × 153.7 mm45 parts2LNo license24S100 Z80 V5
CatspersCoffee
254 × 134.6 mm138 partsCustom license0RP2040/RP2350
6809-v0
bwindrim
152.4 × 101.6 mm7 parts2LNo license0PCPI AppliCard
baldengineer
271.8 × 78.7 mm76 parts2LCC-BY-4.0442GIMIX intelligent 3 port Serial
roberto314
149.9 × 139.7 mm69 parts2LBSD-2-Clause1
How designs wire the 2764
Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the 2764 connects to, and the resistors, capacitors and other passives placed on it.
- The PGM pin is tied to 5V on 17 of 21 designs (not connected on 2, a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VPPpin 1 | Connected to: 5V 71% | — |
| GNDpin 14 | Connected to: GND 100% | — |
| NCpin 26 | Connected to: Not connected 76% · a signal 19% | — |
| PGMpin 27 | Connected to: 5V 81% | — |
| VCCpin 28 | Connected to: 5V 100% | — |
23 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PCPI AppliCard by baldengineer, Vic2020mainboard by danwerner21, PC-8001 SD by yanataka60 and MZ80K SD by yanataka60.
The 2764 in open source designs
The gallery holds 27 open source boards using the 2764 from 25 GitHub repositories; a typical one measures about 143.4 × 115.9 mm and carries around 45 components.
92% are two-layer designs, the rest use four layers or more, and 37% carry an open source license.
The most starred is PCPI AppliCard by baldengineer.
Parts used alongside the 2764
Microcontrollers on boards using the 2764
What boards using the 2764 are built for
2764: common questions
Where can I find a 2764 reference design?
Each of the 27 boards on this page is a real design using the 2764. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 2764 PGM pin connected?
The PGM pin is tied to 5V on 17 of 21 designs (not connected on 2, a signal on 2). Counted from the KiCad layouts of 21 open source designs using the 2764.
What parts are used alongside the 2764?
The 74LS04, 74LS00, 74LS138, 74LS175 and 74LS244 appear in the most repositories here.
Which microcontrollers do boards using the 2764 use?
Most are built on AVR/Arduino (5) and RP2040/RP2350 (1).
How big is a typical board using the 2764?
The median is 143.4 × 115.9 mm, and 92% are two-layer designs.
What is the most popular open source board using the 2764?
By GitHub stars, PCPI AppliCard by baldengineer, with 442 stars.
Can I simulate one of these boards using the 2764 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.