EPROM Prog PS

AebrahmRamos·M68HC11-EPROM-Programmer·KiCad-Project/EPROM_Prog_PS/EPROM_Prog_PS.kicad_pcb

EPROM Prog PS PCB layout, top view — open source board by AebrahmRamos

About the EPROM Prog PS PCB

EPROM Prog PS is an open source PCB design by AebrahmRamos, published on GitHub. It is a 2-layer board measuring 26.7 × 42.9 mm, with 25 components from 18 distinct parts.

Other key parts include the LM317L_TO92. By type, the board carries 10 resistors, 6 diodes, 3 connectors, 3 capacitors, 2 transistors and 1 IC.

It belongs with the usb & debug tools and displays & leds designs in this gallery.

From the project

This project implements an EPROM reader using the M68HC11 microcontroller and a 2764 EPROM chip. The system reads the first 25 bytes of data stored in the EPROM and transmits it to a host computer via serial communication for display in both hexadecimal and ASCII formats.

This project implements an EPROM reader using the M68HC11 microcontroller and a 2764 EPROM chip. The system reads the first 25 bytes of data stored in the EPROM and transmits it to a host computer via serial communication for display in both hexadecimal and ASCII formats.

The hardware setup maps the M68HC11 ports to the 2764 EPROM pins as follows:

- Port B (PB0-PB7): Connected to EPROM address inputs A0-A7 - Port C (PC0-PC7): Connected to EPROM data outputs Q0-Q7 - Port A (PA5, PA6): Control signals for Chip Enable (CE) and Output Enable (OE) - Upper Address Lines (A8-A12): Grounded to…

Main components on the EPROM Prog PS

EPROM Prog PS bill of materials (BOM)

25 components, 18 distinct parts.

QtyPartRefs
1
LM317L_TO92
U1
1
SST3904
Q1
1
TM2301GN
Q2
1
13Vdc_In
J1
1
Prog_EN
J2
1
Vpp_Vcc_Out
J3
1
Power_Ind
D1
1
Prog_Ind
D2
2
1N4148
D3, D4
2
1N60
D5, D6
1
4.7uF 25V
C1
1
100uF 16V
C2
1
0.22uF 50V
C3
3
2.7K
R1, R4, R5
3
3.3K
R2, R3, R8
1
220
R6
2
820
R7, R10
1
6.8
R9

EPROM Prog PS design files

The KiCad project lives in the AebrahmRamos/M68HC11-EPROM-Programmer repository on GitHub; these links point at the commit this page was built from.

EPROM Prog PS: common questions

How big is the EPROM Prog PS PCB?

The EPROM Prog PS measures 26.7 × 42.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EPROM Prog PS?

25 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the EPROM Prog PS design files?

From the AebrahmRamos/M68HC11-EPROM-Programmer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the EPROM Prog PS design in my own project?

The repository has no license, so all rights stay with AebrahmRamos. Use it as a reference, and ask the author before reusing the design.

More boards in M68HC11-EPROM-Programmer

Similar boards