Push button power switch

aecollver·push-button-power-switch·hardware/push-button-power-switch.kicad_sch

Push button power switch

About the Push button power switch PCB

Push button power switch is an open source PCB design by aecollver, published on GitHub under the CERN-OHL-P-2.0 license. It is a board, with 25 components from 14 distinct parts.

By type, the board carries 11 resistors, 5 transistors, 4 capacitors, 2 connectors, 2 diodes and 1 switch.

It belongs with the power & battery designs in this gallery.

From the project

A discrete, high-side MOSFET power switch controlled by a single momentary pushbutton. Designed for battery-powered electronics without requiring a microcontroller or dedicated power-management IC.

A discrete, high-side MOSFET power switch controlled by a single momentary pushbutton. Designed for battery-powered electronics without requiring a microcontroller or dedicated power-management IC.

This circuit was developed as part of a small robotics project where I wanted to replace a mechanical power switch with a momentary pushbutton.

The goal was a simple circuit that could toggle power with a short button press, consume minimal power when switched off, and change state at most once per press, regardless of how long the button was held.

Push button power switch bill of materials (BOM)

25 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DMP3028LSD-13
Load Switch MOSFET
Q1
1
MMFTP3401-AQ
Latch MOSFET
Q2
3
MMBT3904
NPN
Q3, Q4, Q5
2
T50201500000G
J1, J2
1
FSM101
FSM101 / 1437565-3
SW1
1
BZT52-B8V2S_R1_00001
8.2V
D1
1
BZT52-B8V2S_R1_00001
8.2 V
D2
1
CC0805KFX7R8BB105
1u
C1
1
CC0805KRX7R0BB103
0.01u
C2
1
CC0805KKX7R9BB474
0.47u
C3
1
CC0805KKX7R8BB225
2.2u
C4
3
RC0805FR-071KL
1k
R1, R7, R8
6
RC0805FR-07100KL
100k
R2, R3, R4, R5, R9, R11
2
RC0805FR-0710KL
10k
R6, R10

Push button power switch design files

The KiCad project lives in the aecollver/push-button-power-switch repository on GitHub; these links point at the commit this page was built from.

Push button power switch: common questions

How many components are on the Push button power switch?

25 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Push button power switch design files?

From the aecollver/push-button-power-switch repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Push button power switch design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which aecollver chose for the repository.

Similar boards