AeonLabs-LDAD-ATOM-For-Temperature
aeonSolutions·AeonLabs-LDAD-ATOM-For-Temperature
About the AeonLabs-LDAD-ATOM-For-Temperature PCB
AeonLabs-LDAD-ATOM-For-Temperature is an open source ESP32 PCB design by aeonSolutions, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 45.6 × 23.5 mm, with 15 components from 11 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. By type, the board carries 1 connector and 1 diode.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
This is the PCB prototype for the LDAD ATOM . Features WIFI, Bluetooth BLE, and 1 connection for DS18b20 Temperature sensor
PCB-Prototyping-Catalogue >> Laboratory Automation >> Smart DAQs >> 12-bit Smart DAQs >> LDAD ATOM For Temperature
LDAD ATOM features 1 I2C (or 1 digital in) connection, has WIFI and BLE connectivity, externally powered 3.3V to 12V such as a USB plug. This PCB was made to Fit a 45x25mm enclosure. It can connect 1 digital sensor and up to 8 I2C sensors.
This PCB was made to Fit a 45x25mm enclosure.

AeonLabs-LDAD-ATOM-For-Temperature bill of materials (BOM)
15 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x08_Male | SOIC_clipProgSmall | J1 |
| 1 | DS1 | TerminalBlock_4Ucon_1x03_P3.50mm_Vertical | DS1 |
| 1 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | ENR1 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | ESP32-WROOM32 |
| 2 | 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | ESPC1, ESP_EN_C1 |
| 1 | 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | ESPC2 |
| 1 | Polyfuse | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | Fuse1 |
| 2 | HX4002 | HX4002 SOT95 P280X125-6N | HX4002, HX4002B1 |
| 3 | 0.1pF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | PC1, PC2, PWC1 |
| 1 | PWRIN | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | PWRIN1 |
| 1 | SCHOTSKY | D_1210_3225Metric_Pad1.42x2.65mm_HandSolder | D4 |
AeonLabs-LDAD-ATOM-For-Temperature design files
The KiCad project lives in the aeonSolutions/AeonLabs-LDAD-ATOM-For-Temperature repository on GitHub; these links point at the commit this page was built from.
- LayoutLDAD ATOM DS.kicad_pcb
- SchematicLDAD ATOM DS.kicad_sch
AeonLabs-LDAD-ATOM-For-Temperature: common questions
What microcontroller does the AeonLabs-LDAD-ATOM-For-Temperature use?
The AeonLabs-LDAD-ATOM-For-Temperature is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the AeonLabs-LDAD-ATOM-For-Temperature PCB?
The AeonLabs-LDAD-ATOM-For-Temperature measures 45.6 × 23.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AeonLabs-LDAD-ATOM-For-Temperature?
15 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the AeonLabs-LDAD-ATOM-For-Temperature design files?
From the aeonSolutions/AeonLabs-LDAD-ATOM-For-Temperature repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the AeonLabs-LDAD-ATOM-For-Temperature design in my own project?
Yes, under the terms of its CC0-1.0 license, which aeonSolutions chose for the repository.
Can I test firmware for the AeonLabs-LDAD-ATOM-For-Temperature without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k