HardLabs

AeonLabs-LDAD-LVDT-MAX-Smart-DAQ

aeonSolutions·AeonLabs-LDAD-LVDT-MAX-Smart-DAQ

AeonLabs-LDAD-LVDT-MAX-Smart-DAQ PCB layout, top view — open source ESP32 board by aeonSolutions

About the AeonLabs-LDAD-LVDT-MAX-Smart-DAQ PCB

AeonLabs-LDAD-LVDT-MAX-Smart-DAQ is an open source ESP32 PCB design by aeonSolutions, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 34.7 × 35.3 mm, with 30 components from 17 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. By type, the board carries 1 connector and 1 LED.

It belongs with the sensors designs in this gallery.

From the project

AeonLabs LDAD LVDT MAX Smart DAQ and more than 20 sensors

PCB-Prototyping-Catalogue >> Laboratory Automation >> Smart DAQ >> 12-bit Smart DAQs >> LDAD LVDT MAX Smart DAQ

Don't forget to LIKE , SHARE and subscribe the free whatsApp group and if you liked this PCB consider buying me a cup of coffee. Links below.

If you already tested this PCB send me a message. Thank you

The price will be around 30eur plus postage fees. (I will also deliver the assembled PCB with all the components in place at a fair aditonal cost).

AeonLabs-LDAD-LVDT-MAX-Smart-DAQ, from the project README
From the project README

AeonLabs-LDAD-LVDT-MAX-Smart-DAQ bill of materials (BOM)

30 components, 17 distinct parts.

QtyPartRefs
1
Conn_01x08_Male
J1
5
10k
DS1, DS3, ENR1, ICR1, IDR1
2
15K
DS2, DS4
1
ESP32-WROOM-32
ESP32-WROOM32
2
0.1uF
ESPC1, ESP_EN_C1
1
22uF
ESPC2
1
Polyfuse
Fuse1
2
HX4002
HX4002, HX4002B1
1
LSM6DS3
IMU1
1
100nF
IMUC1
1
330R
LDR1
2
MAX6675
MAX66751, MAX66752
5
0.1pF
MXC1, MXC2, PC1, PC2, PWC1
2
AudioJack6pin
Plug1, Plug2
1
RST
RST1
1
USB-M
USB-M1
1
LED_GBRC
LED1

AeonLabs-LDAD-LVDT-MAX-Smart-DAQ design files

The KiCad project lives in the aeonSolutions/AeonLabs-LDAD-LVDT-MAX-Smart-DAQ repository on GitHub; these links point at the commit this page was built from.

AeonLabs-LDAD-LVDT-MAX-Smart-DAQ: common questions

What microcontroller does the AeonLabs-LDAD-LVDT-MAX-Smart-DAQ use?

The AeonLabs-LDAD-LVDT-MAX-Smart-DAQ is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the AeonLabs-LDAD-LVDT-MAX-Smart-DAQ PCB?

The AeonLabs-LDAD-LVDT-MAX-Smart-DAQ measures 34.7 × 35.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AeonLabs-LDAD-LVDT-MAX-Smart-DAQ?

30 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the AeonLabs-LDAD-LVDT-MAX-Smart-DAQ design files?

From the aeonSolutions/AeonLabs-LDAD-LVDT-MAX-Smart-DAQ repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the AeonLabs-LDAD-LVDT-MAX-Smart-DAQ design in my own project?

Yes, under the terms of its CC0-1.0 license, which aeonSolutions chose for the repository.

Can I test firmware for the AeonLabs-LDAD-LVDT-MAX-Smart-DAQ without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards