Atlas load cell

aesirkth·atlas_load_cell·hardware/aesir_scale/aesir_scale.kicad_pcb

Atlas load cell PCB layout, top view — open source STM32 board by aesirkth

About the Atlas load cell PCB

Atlas load cell is an open source STM32 PCB design by aesirkth, published on GitHub. It is a 2-layer board measuring 60 × 50 mm, with 48 components from 27 distinct parts.

Its main chip is the STM32U575CGTx, from the STM32 family. Other key parts include the NAU7802SGI, AZ1117CH2-3.3TRG1, TJA1051T and USBLC6-2SC6. By type, the board carries 17 resistors, 14 capacitors, 6 connectors, 5 ICs, 4 diodes and 1 crystal.

From the project

A load cell reader over CAN

Main components on the Atlas load cell

Atlas load cell bill of materials (BOM)

48 components, 27 distinct parts.

QtyPartRefs
1
STM32U575CGTx
U1
1
NAU7802SGI
U2
1
AZ1117CH2-3.3TRG1
U3
1
TJA1051T
U4
1
USBLC6-2SC6
U5
1
48MHz
Y1
2
jst xh 4
J1, J3
2
jst gh
J2, J5
1
jst_sh 6
J4
1
USB_C_Receptacle_USB2.0
J6
1
SolderJumper_2_Open
JP1
2
pwr
D1, D2
1
MBR1020VL
D3
1
NUP2105L
D4
2
14p
C1, C2
6
100n
C3, C5, C6, C7, C13, C16
1
1u
C4
3
4u7
C8, C10, C11
1
10u
C14
1
22u
C15
Show 7 more
QtyPartRefs
2
10k
R1, R6
4
51
R2, R3, R4, R5
2
4k7
R7, R8
2
470
R9, R10
1
120
R11
2
5k1
R12, R13
4
1M
R14, R15, R16, R17

Atlas load cell design files

The KiCad project lives in the aesirkth/atlas_load_cell repository on GitHub; these links point at the commit this page was built from.

Atlas load cell: common questions

What microcontroller does the Atlas load cell use?

The Atlas load cell is built around the STM32U575CGTx, from the STM32 family.

How big is the Atlas load cell PCB?

The Atlas load cell measures 60 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Atlas load cell?

48 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the Atlas load cell design files?

From the aesirkth/atlas_load_cell repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Atlas load cell design in my own project?

The repository has no license, so all rights stay with aesirkth. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Atlas load cell without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards