19 open source boards using the NAU7802SGI

Real designs built with the NAU7802SGI, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

19 boardsClear filters|Most starred

How designs wire the NAU7802SGI

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the NAU7802SGI connects to, and the resistors, capacitors and other passives placed on it.

  • The XOUT pin is left unconnected on 14 of 14 designs.
  • The VBG pin has a capacitor to GND on 11 of 14 designs, most often 100 nF.
  • The SCLK pin has a pull-up to 3.3V on 11 of 14 designs, most often 4.7 kΩ (then 2.2 kΩ).
  • The SDIO pin has a pull-up to 3.3V on 11 of 14 designs, most often 4.7 kΩ (then 2.2 kΩ).
REFPpin 1Connected to: Signal 57% · AVDD 36%
  • Capacitor to GND on 50% · 1 µF (6), 100 nF (4)
VIN1Npin 2Connected to: Signal 79% · GND 21%
  • Series capacitor on 71% · 100 nF (8), 47 nF (1), 100 pF (1)
  • Series resistor on 64% · 47 Ω (4), 51 Ω (2), 300 Ω (1)
VIN1Ppin 3Connected to: Signal 100%
  • Series capacitor on 71% · 100 nF (8), 47 nF (1), 100 pF (1)
  • Series resistor on 71% · 47 Ω (5), 51 Ω (2), 300 Ω (1)
VIN2Npin 4Connected to: Signal 50% · not connected 21% · GND 29%
  • Series capacitor on 50% · 330 pF (3), 100 nF (3), 470 pF (1)
VIN2Ppin 5Connected to: ACS70331EOLC 21%
  • Series capacitor on 64% · 330 pF (4), 100 nF (3), 470 pF (1)
VBGpin 6Connected to: Signal 79% · not connected 21%
  • Capacitor to GND on 79% · 100 nF (10)
REFNpin 7Connected to: GND 93%
AVSSpin 8Connected to: GND 100%
DVSSpin 9Connected to: GND 100%
XINpin 10Connected to: Not connected 93%
XOUTpin 11Connected to: Not connected 100%
SCLKpin 13Connected to: The microcontroller 64%, P3T1755DPZ 21%
  • Pull-up to 3.3V on 79% · 4.7 kΩ (8), 2.2 kΩ (1), 10 kΩ (1)
SDIOpin 14Connected to: The microcontroller 64%, P3T1755DPZ 21%
  • Pull-up to 3.3V on 79% · 4.7 kΩ (8), 2.2 kΩ (1), 10 kΩ (1)
DVDDpin 15Connected to: 3.3V 100%
  • Decoupling capacitor on 79% · 1 µF (7), 100 nF (3), 4.7 µF (1)
AVDD/LDOpin 16Connected to: Signal 50% · 3.3V 43%
  • Capacitor to GND on 57% · 1 µF (8), 100 nF (5)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DB2.x-Hardware by Plastic-Scanner, Kuhglocke GS by Queens-Rocket-Engineering-Team, Biro 1 by PROJECT-BIRO and Kuhglocke GS by Queens-Rocket-Engineering-Team.

The NAU7802SGI in open source designs

The gallery holds 19 open source boards using the NAU7802SGI from 15 GitHub repositories; a typical one measures about 90 × 70 mm and carries around 98 components.

72% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.

The most starred is DB2.x-Hardware by Plastic-Scanner.

Microcontrollers on boards using the NAU7802SGI

NAU7802SGI: common questions

Where can I find a NAU7802SGI reference design?

Each of the 19 boards on this page is a real design using the NAU7802SGI. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the NAU7802SGI XOUT pin connected?

The XOUT pin is left unconnected on 14 of 14 designs. Counted from the KiCad layouts of 14 open source designs using the NAU7802SGI.

How is the NAU7802SGI VBG pin connected?

The VBG pin has a capacitor to GND on 11 of 14 designs, most often 100 nF. Counted from the KiCad layouts of 14 open source designs using the NAU7802SGI.

What pull-up resistor is used on the NAU7802SGI SCLK pin?

The SCLK pin has a pull-up to 3.3V on 11 of 14 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 14 open source designs using the NAU7802SGI.

What parts are used alongside the NAU7802SGI?

The ESP32-S3-WROOM-1, USBLC6-2SC6, ACS70331EOLC, AMS1117-3.3 and CP2102N-Axx-xQFN28 appear in the most repositories here.

Which microcontrollers do boards using the NAU7802SGI use?

Most are built on ESP32 (12), Microchip SAM (2), STM32 (2) and RP2040/RP2350 (1).

How big is a typical board using the NAU7802SGI?

The median is 90 × 70 mm, and 72% are two-layer designs.

What is the most popular open source board using the NAU7802SGI?

By GitHub stars, DB2.x-Hardware by Plastic-Scanner, with 17 stars.

Can I simulate one of these boards using the NAU7802SGI before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part