HardLabs

Jammer nrf esp32

Afra4509·jammer-nrf-esp32-pcb

Jammer nrf esp32 PCB layout, top view — open source ESP32 board by Afra4509

About the Jammer nrf esp32 PCB

Jammer nrf esp32 is an open source ESP32 PCB design by Afra4509, published on GitHub. It is a 2-layer board measuring 100 × 70 mm, with 10 components from 7 distinct parts.

Its main chip is the ESP32_DevKit_V1_38Pin, from the ESP32 family. Other key parts include the NRF24L01_PA_LNA and TP4056. By type, the board carries 4 ICs, 4 capacitors, 1 battery holder and 1 switch.

From the project

This repository contains the KiCad project files for a Dual NRF24L01+ and ESP32 based jammer or RF testing board.

Main components on the Jammer nrf esp32

ESP32_DevKit_V1_38PinNRF24L01_PA_LNATP4056

Jammer nrf esp32 bill of materials (BOM)

10 components, 7 distinct parts.

QtyPartRefs
1
ESP32_DevKit_V1_38Pin
U1
2
NRF24L01_PA_LNA
U2, U3
1
TP4056
U4
1
Battery18650Holder
BT1
1
SlideSwitch_SPDT
SW1
2
C_0805
C1, C3
2
CP_Radial_D5.0mm_P2.50mm
C2, C4

Jammer nrf esp32 design files

The KiCad project lives in the Afra4509/jammer-nrf-esp32-pcb repository on GitHub; these links point at the commit this page was built from.

Jammer nrf esp32: common questions

What microcontroller does the Jammer nrf esp32 use?

The Jammer nrf esp32 is built around the ESP32_DevKit_V1_38Pin, from the ESP32 family.

How big is the Jammer nrf esp32 PCB?

The Jammer nrf esp32 measures 100 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Jammer nrf esp32?

10 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Jammer nrf esp32 design files?

From the Afra4509/jammer-nrf-esp32-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Jammer nrf esp32 design in my own project?

The repository has no license, so all rights stay with Afra4509. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Jammer nrf esp32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards