Simplekeyboard
agrantushinsky·simplekeyboard·pcb/simplekeyboard.kicad_pcb
About the Simplekeyboard PCB
Simplekeyboard is an open source STM32 PCB design by agrantushinsky, published on GitHub under the MIT license. It is a 2-layer board measuring 288.1 × 97.6 mm, with 158 components from 27 distinct parts.
Its main chip is the STM32F072CBT6, from the STM32 family. Other key parts include the USBLC6-2SC6, LD39050PU33R, MCP23017T-E/SO and MCP23008T-E/SO. By type, the board carries 63 switches, 63 diodes, 14 capacitors, 11 resistors, 5 ICs and 2 connectors.

Main components on the Simplekeyboard
Simplekeyboard bill of materials (BOM)
158 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F072CBT6 | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | LD39050PU33R | DFN6_3X3_STM | U3 |
| 1 | MCP23017T-E/SO MCP23017_SO | SOIC-28W_7.5x17.9mm_P1.27mm | U4 |
| 1 | MCP23008T-E/SO MCP23008-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U5 |
| 1 | UJ20-C-H-G-SMT-2A-P16 USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | FTSH-105-01-F-D-RA Conn_ARM_JTAG_SWD_10 | PinHeader_2x05_P1.27mm_Horizontal | J2 |
| 46 | SW_Push | MX-Solderable-1U | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +38 |
| 1 | SW_Push | MX-Solderable-2U | SW14 |
| 2 | SW_Push | MX-Solderable-1.5U | SW15, SW28 |
| 1 | SW_Push | MX-Solderable-1.75U | SW29 |
| 2 | SW_Push | MX-Solderable-2.25U | SW41, SW42 |
| 1 | SW_Push | MX-Solderable-2.75U | SW53 |
| 7 | SW_Push | MX-Solderable-1.25U | SW54, SW55, SW56, SW58, SW59, SW60, SW61 |
| 1 | SW_Push | MX-Solderable-6.25U-ReversedStabilizers | SW57 |
| 1 | OS102011MS2QN1 SW_SPDT | SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW62 |
| 1 | SW_Push | SW_PUSH_6mm | SW63 |
| 61 | 1N4148W-TP D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +53 |
| 1 | MMSZ5233BT1G D_Zener | D_SOD-123 | D62 |
| 1 | LTST-C191KFKT LED | LED_0603_1608Metric | D63 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | GRM188R61E475KE11D 4u7 | C_0603_1608Metric | C1, C2, C6, C9, C12 |
| 8 | GCM155R71H104KE02D 100n | C_0402_1005Metric | C3, C4, C5, C8, C10, C11, C13, C14 |
| 1 | GCM188R71E105KA64J 1u | C_0603_1608Metric | C7 |
| 2 | RC0603FR-075K1L 5k1 | R_0603_1608Metric | R1, R2 |
| 6 | RC0603FR-0710KL 10k | R_0603_1608Metric | R3, R6, R7, R8, R9, R10 |
| 2 | RC0603FR-072K2L 2k2 | R_0603_1608Metric | R4, R5 |
| 1 | RC0603FR-07330RL 330 | R_0603_1608Metric | R11 |
Simplekeyboard design files
The KiCad project lives in the agrantushinsky/simplekeyboard repository on GitHub; these links point at the commit this page was built from.
Simplekeyboard: common questions
What microcontroller does the Simplekeyboard use?
The Simplekeyboard is built around the STM32F072CBT6, from the STM32 family.
How big is the Simplekeyboard PCB?
The Simplekeyboard measures 288.1 × 97.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Simplekeyboard?
158 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Simplekeyboard design files?
From the agrantushinsky/simplekeyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Simplekeyboard design in my own project?
Yes, under the terms of its MIT license, which agrantushinsky chose for the repository.
Can I test firmware for the Simplekeyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k