12 open source boards using the LD39050PU33R
Real designs built with the LD39050PU33R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Ventilator Main Board
RespiraWorks
350 × 155 mm646 parts4LApache-2.0168STM32
8-Channel-Wireless-EEG
unaldevelopment
81.5 × 54.9 mm132 parts2LMIT3STM32
LED-Strip-Controller-Hardware
ScottGibb
134.6 × 76.2 mm167 parts2LGPL-3.01STM32
Chromapi motherboard
Mowibox
88.1 × 59.4 mm105 parts4LApache-2.01STM32
Simplekeyboard
agrantushinsky
288.1 × 97.6 mm158 parts2LMIT0FPGA
16-IMU-FPGA-board
S0hamJosh1
76.4 × 40.1 mm81 parts6LNo license0STM32
Stm32 balancingRobot
JwAhn0830
100 × 50 mm64 parts4LNo license0RP2040/RP2350
Fudge board
mudd-spec
21 × 51 mm50 parts2LNo license0STM32
WolffNest-STM32-board
Wolffyx
49.3 × 35.7 mm40 parts4LApache-2.00STM32
Exo pcbs
Exocet-Polytechnique
75 × 55 mm37 parts2LGPL-3.00STM32
Mcu test board
jrseti
59.9 × 57.5 mm57 parts4LMIT0STM32
Stm32 official prototype
blakep7
103.6 × 114.1 mm73 parts4LNo license1
How designs wire the LD39050PU33R
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the LD39050PU33R connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 12 of 12 designs, most often 1 µF (then 100 nF).
- The VOUT pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 1 µF).
- The PG pin is left unconnected on 10 of 12 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2, 7 | Connected to: GND 100% | — |
| PGpin 3 | Connected to: Not connected 83% | — |
| VOUTpin 4 | Connected to: 3.3V 92% |
|
| NCpin 5 | Connected to: Not connected 100% | — |
| VINpin 6 | Connected to: 5V 75% · a signal 25% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ventilator Main Board by RespiraWorks, 8-Channel-Wireless-EEG by unaldevelopment, Stm32 official prototype by blakep7 and Chromapi motherboard by Mowibox.
The LD39050PU33R in open source designs
The gallery holds 12 open source boards using the LD39050PU33R from 12 GitHub repositories; a typical one measures about 84.8 × 56.3 mm and carries around 77 components.
58% use four copper layers or more, and 67% carry an open source license.
The most starred is Ventilator Main Board by RespiraWorks.
Parts used alongside the LD39050PU33R
Microcontrollers on boards using the LD39050PU33R
What boards using the LD39050PU33R are built for
LD39050PU33R: common questions
Where can I find a LD39050PU33R reference design?
Each of the 12 boards on this page is a real design using the LD39050PU33R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LD39050PU33R VIN pin?
The VIN pin has a decoupling capacitor on 12 of 12 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 12 open source designs using the LD39050PU33R.
What decoupling capacitors do designs use on the LD39050PU33R VOUT pin?
The VOUT pin has a decoupling capacitor on 11 of 12 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 12 open source designs using the LD39050PU33R.
How is the LD39050PU33R PG pin connected?
The PG pin is left unconnected on 10 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the LD39050PU33R.
Which microcontrollers do boards using the LD39050PU33R use?
Most are built on STM32 (10), FPGA (1) and RP2040/RP2350 (1).
How big is a typical board using the LD39050PU33R?
The median is 84.8 × 56.3 mm, and 42% are two-layer designs.
What is the most popular open source board using the LD39050PU33R?
By GitHub stars, Ventilator Main Board by RespiraWorks, with 168 stars.
Can I simulate one of these boards using the LD39050PU33R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.