HardLabs

Buck bidireccional

aguscsc·Bidirectional-Buck-DC-DC-converter·Design/pcb/buck_bidireccional/buck_bidireccional.kicad_pcb

Buck bidireccional PCB layout, top view — open source board by aguscsc

About the Buck bidireccional PCB

Buck bidireccional is an open source PCB design by aguscsc, published on GitHub under the MIT license. It is a 2-layer board measuring 85 × 60 mm, with 20 components from 13 distinct parts.

Other key parts include the IR2184. By type, the board carries 4 capacitors, 4 resistors, 2 transistors, 2 connectors, 1 IC and 1 test point.

It belongs with the power & battery and test & measurement designs in this gallery.

From the project

This repository contains the development steps for the making of a Bidirectional Buck DC-DC converter

This repository documents the design and implementation of a bidirectional DC-DC converter. The system can operate in both buck mode (step-down) and boost mode (step-up), enabling power flow in both directions.

Multisim, Ltspice and MATLAB/Simulink coil64 - PCB

Kicad ## 📐 Specifications - Switching frequency: 60 kHz - Maximum power: 5 W

$I{sat} = \frac{B{sat}\cdot l}{\mu{0}\cdot \mu{r}\cdot N}$ Where: - \($I{sat}$\) = Saturation current - \($B{sat}$\) = saturation flux density of the core material - \($l$\) = effective magnetic path length of the core - \($\mu{0}$\) = permeability of a…

Buck bidireccional, from the project README
From the project README

Main components on the Buck bidireccional

IR2184

Buck bidireccional bill of materials (BOM)

20 components, 13 distinct parts.

QtyPartRefs
1
IR2184
U1
2
NMOS
Q1, Q2
2
Screw_Terminal_01x02
J2, J3
3
Conn_01x02_Pin
PWM1, Vgs_Q2, Vl1
1
TestPoint
TP1
1
Screw_Terminal_01x02
Vcc1
1
D_Schottky
D4
1
1m
L1
1
6.8u
C1
1
2.2u
C2
2
100n
C3, C4
2
10
R2, R3
2
10k
R4, R5

Buck bidireccional design files

The KiCad project lives in the aguscsc/Bidirectional-Buck-DC-DC-converter repository on GitHub; these links point at the commit this page was built from.

Buck bidireccional: common questions

How big is the Buck bidireccional PCB?

The Buck bidireccional measures 85 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Buck bidireccional?

20 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Buck bidireccional design files?

From the aguscsc/Bidirectional-Buck-DC-DC-converter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Buck bidireccional design in my own project?

Yes, under the terms of its MIT license, which aguscsc chose for the repository.

More boards in Bidirectional-Buck-DC-DC-converter

Similar boards